#36249, "RE: tools that will be needed?" In response to Reply # 1
unless the machine shop is assebling the motor, piston ring compressor, a manual to do it with air tools to remove ale bolts and other stubborn stuff 26" breaker bar is very useful
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#36250, "RE: tools that will be needed?" In response to Reply # 2
if you will be building the motor, expect to spend about $150-200 maybe on tools to do it. plus alot of sealers etc. i would let the machine shop do it or someone else.
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#36252, "RE: tools that will be needed?" In response to Reply # 4
I'm sorry, i'm not usually like that but first you need to master using proper english in your posting before you ask for help, especially with building an engine.
Jon
1997 Eclipse RS
14.21@101mph 10/4/02
MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC
Search
Printer-friendly copy
3 Users in Chat
