I need to know which line is the return line for the auto tranny. Is it the one closest to the engine or closer to the wheel well?
Please help me out.

"Natty Ride"


http://dirty.thisfreedumb.com/

well nobody has responded to your post yet so, Put both lines in their own pail, can or whatever and start it, dont let it run very long (only seconds) enough time for the tranny to pick up the fluid from the pan. then look and see which one pumped the fluid out, and that one goes in the inlet. be careful though, you can pump out a $hit of fluid in a hurry.

ASE certified master auto technician

Well isn't that a bitch!
I already hooked up the tranny cooler to the line near the drivers side wheel. I don't know if this is right but I don't have very good luck with my tranny questions.

Thanx for your response man, atleast you tried to help.

"Natty Ride"


http://dirty.thisfreedumb.com/

Sorry dude.
I didn't know the answer to that exact question, so I left it for someone who might know to field. I will however share all that I know about our transmissions (us A/T guys need to stick together).

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

Do you have a tranny cooler hooked up? I just need to know if I hooked it to the right line. I know there are alot of people on this board with tranny coolers, but I don't know why they wont respond.

"Natty Ride"


http://dirty.thisfreedumb.com/

Let me give this a little bump. This is just crazy.

"Natty Ride"


http://dirty.thisfreedumb.com/

Hey, I wanna know too so I can hook up my Trans Temp gauge.

Well, now 2 people want to know. Maybe now someone will answer this. I can only imagine the possibilities.......

"Natty Ride"


http://dirty.thisfreedumb.com/

check out dsmtalk.com. they actually have a specific A/T forum, which is quite helpful. asking there should yield an answer very quickly.

good luck!

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

I was just hoping it wouldn't come to that.....

"Natty Ride"


http://dirty.thisfreedumb.com/

I have a B&M trans cooler on my car, only because whoever owned this car before wrecked it and replaced the a/t radiator with an m/t one.
I didn't really care about which way they flow because it doesnt have any valve in it to control the direction of flow. I intend on putting in a guage at a later time (first I need to buy cup mounts though). so I'll need to know the answer to your question soon.

I will just unhook the cooler lines, put the trans in neutral, pull the engine fuse, and have one of my buddies crank the engine once and see which hose the fluid comes out of.

let me know if you get there first though.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

dsmtalk sucks, everyone and their mom on that site has a 4g6X engine. No one has answered or attempted to answer my question on the other board.

Man I hate the idea of pressure hoses being unplugged and having some friend watch which hose will spray him.

sorry to be so late. but i have not been under my car recently but for me, i have mine on the line which connects to the drivers side of the radiator, so follow that line to the tranny ontop and you should be good. i have my cooler mounted on the side vent on the drivers side. the line i tap into for the cool is great since that is when it gets cooled down after the radiator back to the tranny. hope this helps a bit.


Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

Thanx for the info man! I tapped in to the line on the drivers side of the radiator too. That make me feel alot better now that I don't have to move anything around again.

I installed the status drive gears last night and I love that shit. If anyone has an AT and doesn't have these gears, your missing out.

"Natty Ride"


http://dirty.thisfreedumb.com/

cool
glad to hear about your final drive swap. I'm sure you'll love it.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

glad i helped.. the final drive thing, whats the website how to etc? i wanna read it or try it..
cool


Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

check the things we've seen before section and do a search.
lots of info on this.

ask me all of the questions you want. I just did mine. It was a breeze, but keep in mind that it is only for the automatics.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!