just got this email from driveshaftshop.com:

mat
we have discontinued the stage 3 dfor the car, we have level 2 axles
that
will handle about 400hp and stage 5 that will handle 500+




thanks
Frank Rehak

http://www.driveshaftshop.com/
"we specialize in the impossible"
1-800-564-2244


like his spelling huh? anyways i thought i'd update in case anyone needed the info or was thinking of upgrading their axles.

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

What will stock driveshafts handle? Hoping I won't have to deal w/ any of that w/ my near-future upgrades.. sounds pricey.

FS: 2.5" Test Pipe 25 shipped

most people are fine with stage 2's, most even with stage 3's. after that you'd better upgrade. i know armond has broken a lot of axles but he's stage 5 + i guess. the stage 5's are $1899.99. if my monster is able to be built, that's what it will have man i'm hoping so bad

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

ehhh... stages?

rephrase with HP in place of "stage #" pls!

FS: 2.5" Test Pipe 25 shipped

lol, ok, i'll try. although my #'s may not be too accurate, i'll try. if anyone see's that i'm wrong, please correct me. hmmm....if i had to guess off of the top of my head, i'd say somewhere around 350hp at most with stock axles. but i said at most. and it also depends on how you launch it. if your real easy on your launches then you could get away with not having to upgrade for awhile. but if you like to launch it hard a good bit then i'd say to upgrade at about 325hp or so. like i said before though. my #'s may be a little off.

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

Armond has stage 2 axles. Stock axles will hold up to various amounts of power. I have seen them break on a stock car and I have seen them hold up on a fully modified car. Results vary.

05 Mazda RX-8
06 Lotus Elise

thanks for correcting me.

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

*knock on wood.... that hasnt been a prob for me yet, when i got the car, i did what any kid with too much power would do, cranked the boost all the way and raced everyone in town.... many many 26-28psi runs, never a broken axle... ofcourse, maby it wansnt tuned well and not making the HP it should have been, but... still... stock axles can take a beating... i will get stage 2's when i do run into problems, spending 1900 on axles alone is crrrrrraaazzzzyyy

I have a set of stage 3 axles and hubs. I broke the inner cv on the drivers side already...(15psi)

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

was there something wrong with the stage 3's? yeah the price is a little bit high but i figure might as well get the stage 5's considering i want reliability, etc. lol, hopefully i'll have the money though, never know.

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

The stage 2 axle are plenty sufficient after they have gone back to redesign a few times. Armond was constantly breaking the stage 2 axles. He kept sending them back and they would reinforce wherever it was breaking. Broke in new places almost every time. They now look pretty beefy. He has yet to break one of the latest design stage 2 axles. He was able to break the stock axles with the stock motor. He has a very stiff suspension which does not help. I think they will hold up to mot everything people throw at them, I am also on stock axles still. I have broken three in my lifetime. Here is a pic ofmy broken stock axle next to a stage 2 axle.

05 Mazda RX-8
06 Lotus Elise

I think the only difference between stage 2 and 3 is the bigger hubs.

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

man thats quite a difference. thanks for the pic. i'm sure they hold up well especially on Armonds car. i know you don't drive yours much so..hehe. i think i'll still go with the stage 5's for the hp goals i'm going for. but then again...never know if it'll happen. have to wait and see... i hate waiting

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby

you "won't" break the stage 2 axles I have in my car .

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

maybe, depends if howell makes that 3.0 block. if they do, and things go the way i'm hoping, then yes, i probably would

Matt
a.k.a. bustrblue1
R.I.P '95 Eclipse GS
intake, exhaust, push button starter, painted interior, custom short shifter, and one shiny car!
http://www.cardomain.com/member_pages/view_page.pl?page_id=230275
^ shows what happened to my baby