*repost from dsmtalk... ppl there = not helpful*

Not looking good for my RS right now... Leaked a buttload of oil, got to the point where a loud clanging was audible... Turns out I've got a jacked up crankshaft, "off by 14 1000's", mechanic said. 3 of 4 rods are borked royally..Bearings completely like... gone... Hopefully my pistons are okay.

its TBD whether or not a complete swap is in order... he has yet to take off the head+poke around... Mitsu quotes 3k for a new 420a and i'd rather not go junkyardin' for an engine...

I found a place for the crankshaft, $110+$25 for shipping.
So far the best price for the rods is Crower, $677. I remember them being on sale for like... 6 or less just a few months ago... so... does anyone sell em for less?

thanks!

FS: 2.5" Test Pipe 25 shipped

Can I ask why you want to go with Crower? Unless you plan on producing monsterous amounts of horsepower, I'd say go with Eagle. I have eagle rods and so does a lot of other people on this board and they are made to hold some serious power plus you can get them for $350-$400. Just my .02

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

where can i get the eagle rods for the best price?

hmmmmm eagle eh...

well ... right now conservative estimates place it at 250-275hp.

Turbonetics T04R Turbo, JE Pistons, Supra fuel pump, 400cc injectors, 9 pounds of boost @ high (currently)

I'll be moving to 500/550cc (forgot what they are, think 550), not sure what boost I'll run. But as long as I'm upgrading, wouldn't it be wise to get the strongest I can?

Though it would be nice to save $300...

FS: 2.5" Test Pipe 25 shipped

scroll down to Eagle rod Neon 420A Best price i've seen so far. They also cary other brands, and other engine parts like pistons ect.

http://www.raceeng.com/showItems.asp?cat=IMP&id=101323310120544333454777112323447843223432366545511120113220123201223567034322322323434344322303444323442344454343266&subcat=RD&Supplier=2494

369 a set, comes with wrist pins also. You cant use stock pistons with these rods also i do believe without some piston work...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

how much power can Eagle rods take?

FS: 2.5" Test Pipe 25 shipped

I have come to understand lately that eagle rods can take what your going to dishout. Gary told me yesterday that with the proper rod bolts they will support 800HP!!! I don't think we'll be able to test that one. But he also said that eagle conservitvely rates their rods at 500HP.

I edited to the wiki!

sweeeeet

that saves me $300



Guess that'll go towards new injectors + tuning my afc/boost controller...

(yes my sig says I've got 500cc, but I emailed hahn racecraft, they say these are just 390s!! so either I have them in the car now, or original owner is lying like a bitch)

FS: 2.5" Test Pipe 25 shipped

One thing to be careful of is rod bolts!!!! The rod is able to handle that abuse but make sure when you get ARP rod bolts for them that you spesify your horse power goals. The bolts have to take the abuse as well.

I edited to the wiki!

Hmm... are they here?

http://www.raceeng.com/showItems.asp?cat=IMP&id=101323310120544333454777112323447843223432366545511120113220123201223567034322322323434344322303444323442344454343266&subcat=HW&Supplier=91304A

emailed them for both the rods + now these bolts, guess I can just wait for their reply.

Have a good place to get those Energy Suspension engine mounts? heard good things about those; as long as my engine is on a lift I figure i should put them in. Saw that theyre ~30, I can only find em for 90!!

FS: 2.5" Test Pipe 25 shipped

If there are any doubts about Eagle rods, just contact Jojo Callos and ask him how well he likes his in the Castrol/Integra drag car.

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

>If there are any doubts about Eagle rods, just contact Jojo
>Callos and ask him how well he likes his in the
>Castrol/Integra drag car.

Heh

jojo

FS: 2.5" Test Pipe 25 shipped