I was just wondering how much some of you guys have paid to 'open' up your intake manifold (I don't know if I'm saying this right, but I'd like mine to be the same size as the 55mm TB that I'm going to put on), I don't have a lot of money right now to P&P it, just looking to make the openings the same size...

William 'Tha.Will' McGroarty

~*Roary*~
Sick Skillz

If all you want to do is have the t/b matched to the intake, I would guess around $25 to $45 at a machine shop. They would most likely be the cheapest and do the cleanest work.

ASE certified master auto technician

The opening is almost 55mm, it may be 54mm. The difference is very minimal. I wouldn't pay anybody to open it up until you get the whole thing ported & polished. $25 to $45 would put you close to the $80 you can get the manifold ported/polished for at ARD.

If you have a dremel get a metal sanding bit and do it yourself. Or you "can" do it by hand with sandpaper (a much longer way of doing it, only try if you ar every patient)

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Trust me, don't try it with sand paper, you'll spend months polishing the thing

A Dremmel with a long flex extention is the best bet. Even with a dremmel it will be a time consuming process smoothing out those runners.

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

I wasn't talking about the whole manifold with sandpaper. He was just looking to open up the entrace to the manifold. That would be bad enough with the sandpaper. But the whole manifold? I'd rather drink turpentine and piss on a brush fire than try to port and polish the manifold by hand.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines, AFX 55mm TB (re-installed once exhaust is done, intake was outflowing exhaust)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Love the wording you chose... yeah, even with the Dremel, it is a pain in the ass...
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

details details...

heh heh, well he said "open up" and when I hear that I don't think of just a port match

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart