What (mechanically) could make a vehicle run rich? I have a 90 Chevy S-10 I am getting terrible gas milage, I can't start it after it's warm b/c it floods itself with fuel. I took apart the fuel injectors and they are dumping way too much fuel on the butterfly valve when the throttle cable is pulled. So what could cause a vehicle to inject too much fuel? I'm thinking maybe a vac hose that is sucking too much ... other ideas?? TIA



AEM CAI|SpiralMax|NGK Plugs|Magnecor Wires|GST Exhaust|Mirror Tint|Grillcraft grill|EBC brakes|Brembo Crossdrill/slotted rotors|Front/Rear strut bars|Konig VeloCT 17x7|Niitto 450's|
Oct:55/57mmTB??

1999 Eclipse GST 4G63

bad o2 sensor= bad gas milage/running rich etc..
if the o2 sensor goes bad your car will resort to default fuel maps which are usually super rich to prevent problems

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

What type of injection? TBI? TPI? ???

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

That happened in my old 90 Skylark, turns out I fried the fuel injection chip in the computer, (EPROM?). bring it somewhere to get it (computer) read.

__________________________________
-Ryan

Ok, educate me here, what is TBI/TPI fuel injection? It's a 90, so it has the old carborater looking fuel injection system with the injector sitting in the center of the carb housing. And, thanks ^^^^ for the O2 sensor idea. I'll check that out.



AEM CAI|SpiralMax|NGK Plugs|Magnecor Wires|GST Exhaust|Mirror Tint|Grillcraft grill|EBC brakes|Brembo Crossdrill/slotted rotors|Front/Rear strut bars|Konig VeloCT 17x7|Niitto 450's|
Oct:55/57mmTB??

1999 Eclipse GST 4G63

its not carburated if its got injectors
carbs have bowls that hold the fuel and its pulled out by gravity etc..

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

I realize it is not carborated - what I am saying is that some of the first fuel injection systems that came out (late 80's/early 90's) borrowed the look and housing components of the old carborated systems - probably to save money on the manufactures part. I am not sure what they were called, but that is the type of fuel injection system I have in my truck - very different from the modern day fuel injection systems.



AEM CAI|SpiralMax|NGK Plugs|Magnecor Wires|GST Exhaust|Mirror Tint|Grillcraft grill|EBC brakes|Brembo Crossdrill/slotted rotors|Front/Rear strut bars|Konig VeloCT 17x7|Niitto 450's|
Oct:55/57mmTB??

1999 Eclipse GST 4G63

just an FYI, Fuel Injection has been around a lot longer than the late 80's, think OLD Corvette, like, the first ones that came out... they were fuel injected.

adam

1990 Eclipse GS-T

>I realize it is not carborated - what I am saying is that
>some of the first fuel injection systems that came out (late
>80's/early 90's) borrowed the look and housing components of
>the old carborated systems - probably to save money on the
>manufactures part. I am not sure what they were called, but
>that is the type of fuel injection system I have in my truck
>- very different from the modern day fuel injection systems.

Yup The first fuel injection systems generally used were called throttle body injection (or single point injection). It basically had one injector right at the throttle body. It was easy and cheap to adapt this setup to cars that had carbuerators since all you needed to do was stick a throttle body with an injector where the carb used to be on top of the intake manifold. It just bolted on.

It was an effective setup for the time, better than carbs, and gave manufacturers a good stopgap while they developed better systems for the future.

See this webpage link below for more info. The second page in the article has most of the comparison info for carbs and fuel injection, but the whole article contains useful information.

http://www.howstuffworks.com/fuel-injection.htm

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

When you pull the throttle and its just stitting there, you're going to activate the accelleration pump. It's supposed to squirt a good amount of juice when you do this. How many injectors do you have? Run the engine with the TB open so you can see down into the venturi. When it's running, make sure that the injectors are spraying the same amount. Also make sure that that the injector isn't dripping from the nozzle. Try revving it to and holding it at a higher rpm. If an injector is dripping then replace it. If one is spraying inordinately more than the other then replace it. I'm sure there are probably other reasons why you would need to replace them but those are the reasons I know of. When you're running this kind of test with an open carb/tb don't put your face directly over top of it. Backfires can hurt so be careful.


ride__________95 Eclipse RS : 5 speed
power________Gude cams : AFX UDP : ram air : test pipe : Thrush glasspack
suspention___BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!)
shizzle_______AutoCommand remote start : dual air horns
incomming___GreenSlime F/R lower strut ties : Jeep TB

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Thanks Metal Jim, what your describing is exactly what I was doing last night. I didn't think to really notice whether or not they were spraying evenly or whether one was dripping or not. I'll have to get back in there tomorrow and see exactly what's it's doing. As old as it is it's starting to sound to me like maybe I need to replace the injectors. ... and thanks to VX100 for explaining those fuel injections system much better than I did. Good info.



AEM CAI|SpiralMax|NGK Plugs|Magnecor Wires|GST Exhaust|Mirror Tint|Grillcraft grill|EBC brakes|Brembo Crossdrill/slotted rotors|Front/Rear strut bars|Konig VeloCT 17x7|Niitto 450's|
Oct:55/57mmTB??

1999 Eclipse GST 4G63