#33427, "finished putting my CM stage 4 gat a few questions"
okay i just got done putting in my clutch. the clutch engages very high in the pedal stroke, almost all the way to the top, is this normal. i also noticed that the pedal is rediculously soft i remember hearing that this will go back to normal in a little while. lastly, i get a little chatter when i engage the clutch, what is the best way to drive withe this clutch? thanks james
#33430, "RE: finished putting my CM stage 4 gat a few questions" In response to Reply # 2
I was driving around today and i noticed that my tranny is making a little noise, like rattling ot ticking. it used to make this noise before then it went away and now it is back. i drained my tranny when i replaced the clutch, and refilled it with mitsu tranny fluid, i also am getting this noise which I am 99 percent sure it the new TO bearing. it is like a hissing sound i think it is the TO bearing slipping, it goes away when the car warms up i bled the clutch again and that made it better. this ticking i'm getting it seems like it is not consistant. it wil go away and if i press the clutch a few times it will come back and then if i press it a few more times it will go away. is this normal? i'll just drive it around and hope it goes away. lates james
#33431, "RE: finished putting my CM stage 4 gat a few questions" In response to Reply # 3
I got that noise too after I installed my SPEC stage 3 clutch about 1000 miles ago. The noise seems to be getting better, but its not gone. It does go away sometimes if I push the clutch in or rev the car up, but then it'll come back again later... I also drained my fluid and replaced it with the mitsu fluid as well.
Matt 1995 Eclipse GS 2.0L, S16g Turbo, 8 Injectors, 26psi
1998 Eclipse GSX 2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...
Search
Printer-friendly copy
1 User in Chat
