Well I spent half the day yesterday trying to get the POS to work. It came w/ a 9 pin serial connector but I have the 25 pin port on my laptop. I tried plugging into that but it didn't work. So I bought a serial to USB adapter (freaking $70) and that won't work either. It has the busy message then it terminates and says that either the ignition isn't on or the cable isn't plugged in. So my OBD-2 port connector has like 5 pins in it and it just slips on. It doesn't snap or anything and is real easy to pull off. Is this normal? Is there any special tricks I should try?

If you look in settings -> gateway in the datalogger software, make sure everything is unchecked except ISO, and ISO is set to 75 10 10. if it still won't connect, try 150 10 10. I have the best luck on one of those two settings. If it STILL won't connect, try a db25 to db9 adapter, rather than serial to USB. The software is hard coded to look at a COM port.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Alright I'll give that a try when I get home. Thanks!

BTW how would I have known that if I didn't have you to ask? Shouldn't it have instructions that tell you that?

It does. the help files that come with the software are very comprehensive. How do you think i knew that? :-P

RTFM, dude.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

i have a question, how do you show the o2 sensor voltage relative to rpm. Once i make a run i want to see what my values are for each few hundred rpms. so then i can adjust accordingly

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

under DATA, send both RPM and O2 sensor 1 bank 0. on the GRAPH tab, graph both those parameters. Go.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

>>>RTFM, dude.<<<

Yeah that'd probably help. I DL'd the software but didn't look for any help files. My bad.

OK I tried those settings and a bunch more and no luck. The manual says the ISO won't work w/ USB. I don't have a serial port on my laptop. I tried connecting it to the parallel port and it won't work there either. Am I SOL because I don't have a serial port?

You have to get the adapter box that plugs into your USB port(s).

Greg Williamson
1999 Eclipse GS "Sport" (Sold)
Star Stage III
12.817 @ 109.36

I have a serial to USB adapter. It still doesn't work.

your laptop has a com/serial port, or it's a peice and should be thrown out. you probably just haven't found it or something (hidden under a door or what not). I have NEVER seen a laptop that didn't have a basic serial port.

The newest top-of-the-line laptops from Toshiba don't have serial ports...

1995 Eagle Talon TSi AWD
1996 Eagle Talon n/t(for sale!)
1998 Kawasaki ZX-6R Ninja

Is the db25 port a serial port? I thought it was parallel but I could be wrong. Even if that is the case I tried a db9 to db25 adapter and that doesn't work either. I tried that first because it was $5 compared to $70 for the USB converter. I just bought this thing last summer. It's not THAT old.

>The newest top-of-the-line laptops from Toshiba don't have
>serial ports...

Toshiba is CRAP in my book. especially if they've dropped as important a component as that. which unfortunatly is going to happen more since microsoft and intel are preparing to completely get rid of the old serial and parrallel ports all together.