Hey guys, I tried doing a search through old posts but couldn't find relevant information.

I'm trying to replace my intake right now, and came across a problem. There's this pipe that feeds back into the stock intake airbox, which seems to be coming from the bottom half of the header. It is circled in the pics. What am I supposed to do with the sensor attached to it? And how am I supposed to use an aftermarket intake on this car?

Just take it off, I think that dealers were supposed to remove that part anyways. I have a 95, (still have the sensor attached), but the part that is supposed to run to the headers? has been removed and capped off. (Disconnect the wires running to it also). No ill affects will be seen. Just make sure everything is sealed up.

__________________________________
-Ryan

i too have a 96 Talon ESi, and I haven't noticed any problems since i put the intake in it. No worries mate

thnx ppl! Had me worried there for a sec.

>Just take it off, I think that dealers were supposed to
>remove that part anyways. I have a 95, (still have the
>sensor attached), but the part that is supposed to run to
>the headers? has been removed and capped off. (Disconnect
>the wires running to it also). No ill affects will be seen.
> Just make sure everything is sealed up.

Do you know how to plug up that whole if my dealer won't do it for me? I think that recall is USA only...

So THAT is what the secondary pulsed air injection is! Never seen pics of it, even. Yeah, I think that any dealership should take it out, even in Canada.
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

>So THAT is what the secondary pulsed air injection is! Never
>seen pics of it, even. Yeah, I think that any dealership
>should take it out, even in Canada.
>-=B-=


secondary pulsed air injection??? is this like a bastard cousin of turbo? Canada only?

all these questions...i need answers!

lol...don't mind me, i'm a bit wasted atm, not driving mind you

I'm gonna take a look at mine in the morning and tell you what I see, I'm thinking it's just a bolt you put in, but I'll check just to be sure. or maybe some kind of screw on cap (metal of course) plastic would burn real quick.

__________________________________
-Ryan

>I'm gonna take a look at mine in the morning and tell you
>what I see, I'm thinking it's just a bolt you put in, but
>I'll check just to be sure. or maybe some kind of screw
>on cap (metal of course) plastic would burn real quick.

I was thinkin plumbing cap, but the thing is, I can't remove the metal part where it becomes rubber hose. It's stuck on, and i cant get enough leverage to unscrew it.

I have a 95 esi should be the same setup. When i got my car non of those hoses are there the spot where the rusty looking part meets the clean silver is caped off with a metal nut but the top side of the nut is sealed.... i always wondered why it looked like it was supposed to connect to soemthing.

http://www.geocities.com/dsm9696/myesi.html

Honda's are everywhere. You can't throw a rock without hitting one.

take a torch to that mother!!!! (the clean silver thingy) avoid getting the rusty part hot, if not..... um, I don't reccomend this at all (only a last resort) drill a hole in the silver thing (all the way through) heat up the connection, put a long metal rod through the hole, and pull toward you like no tomorrow!!!. Just make sure the metal rod will take it.

__________________________________
-Ryan

You know what I hate? Grasshoppers, those damn things always ruin I nicly washed car... Its bullcrap. I mean, you take the time to wash your car all nice and then you go for a drive and when you get back your front bumper is covered with these big yellow spots of dead grasshopper.....AHHHHHHHH!!!!!!!!!! You know what some company needs to make for a mod for an eclipse?......Something to kill all these damn grasshoppers before they hit your bumper... And dont tell me to buy a bra... Those are even worse then the dead grasshoppers. JEEZE....