#32888, "Help with 02 hi-voltage code 0132..please"
AFter I washed my engine bay I accidently got the connector wet. So I turn on the car and my A/F gauge pegs to the last green and stays there throughout driving. It hesitates and surges when driving and idles off-beat. It threw the Check Engine and Autozone came up with the code 0132 O2 sensor sees more than 1.2v for 30 sec. I read the Service manual and it says when this happens the O2 sensor voltage shorts to the 02 sensor heater voltage. I take a Multimeter and get 13V for the heater and the O2 reads 9V..WTF?! I don't know if it's the connector or the O2 sensor itself. But how could it be damaged...by electrical means?? I'm gonna try to ditch the connector and straight wire the SOB to see what happens. Please anybody with a clue help out. THanks
ALvin
96 RST
http://www.kaptainmyke.com/tir/gallery/SemperBoost Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews Cleared Headlight turns/PIAA bulbs
Search
Printer-friendly copy
2 Users in Chat
