hey guys i never took my car past 120 but is there a speed limiter on these things. If so i sthere nay way to take that off and take of the rpm limiter.

so one can rev higher and get longer gears

thanks

DsM Power Soon to be turbo yahhhhhh

nope, absolutely no governor on the 2g non turbos, on the gs-t's there are though

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)

what does governors mean, meaning that there is no speed limiter but there is a rev limiter so what to do with that..

thanks

DsM Power Soon to be turbo yahhhhhh

governer is another word for speed limiter.
which there isn't one as said above.

about the rev limiter.. you don't want to take it off.. you'll blow your motor up. where it's set at (7200RPM) ya don't probably even want to take your motor that high more then maybe once or twice.

i do undertand that is a risk if pass 7k but what i mean in future i want to redo bottom end and top end. If top end is done one then could go more than 7k right. I have seen some gst of course 4g63 engine reving 9k well they say. so i actually have heard

If not i read something before that you can install a a/t on an manual tranny to make 5 gear lower so can go faster top end more top end at more MPH or is it higher gears that do that....

thanks

DsM Power Soon to be turbo yahhhhhh

ya if you rebuild the bottom and top end with all highperformance stuff, you could probably safely rev higher.. but you'd need either a new ECU or a standalone system to remove the rev limiter (i beleive, don't quote me on that).

actually, thats kinda wrong what you said....The reason why you cant rev past 7200 RPM's isnt because the bottom end isnt strong enough, its because the valves will float off the valve springs, and once they do, they will collide with the pistons, and well we know what happens from there....As far as making your redline higher, the key parts besides the computer control limit is getting some high quality lightweight valve train components, IE, titanium valve retainers, springs etc.

1997 Eclipse GS
AEM CAI
Apex'i N1 Catback
Greddy Header
5% window tint
Front-Rear-Lower Rear STB's
Yellow Painted Calipers
1st gen altezzas with original painted center piece
Soon-Tokico Illum's or Blues

hey thanks man i really though it was rebuilding and that is it but i will keep in mind about the valves. I really think will be better performance if higher rev, becuase makes it kind of longer gears.



thanks

DsM Power Soon to be turbo yahhhhhh

Our gears are already long (with a 5spd anyways). I can hit about 35-40 in first, 60 in second, 90 in third, 120 in fourth, and 5th will go to 147. I've only had mine up to 135 on the interstate (there were no cars around). It takes a lot to get past 120 because that's where the aerodynamics really come into play. I dont know if a stock engine could hit 147, it might not have the power to over come the drag.

-Nate



________________
-98 Avenger I4 5spd
-ALL MOTOR build up in process
-Mods: AEM Front Big Brake Kit, AEM CAI, Bosal Header

Next Mods:
Bored Throttle Body, Ported Intake Manifold

-Nate

___________
-88 Mercury Tracer 1.6 3spd auto
-95 Eclipse GS 5spd
-Mods: Megan Header, Megan Cat-Back, Pacesetter High-Flow Cat, AEM V2, Fluidyne Radiator, Hurst Short Shifter, Prothane Motor Mounts
-All-Motor Buildup on the way
-VIS Invader hood, R34 front, Halo Proejctors, M3 LED Mirrors, Projector Fogs, Blue Heater Hoses

You should hit 100 in third man...or is that just a venger thing?

>
>
>You should hit 100 in third man...or is that just a venger
>thing?

I have hit about 95 but not every time.

-Nate



________________
-98 Avenger I4 5spd
-ALL MOTOR build up in process
-Mods: AEM Front Big Brake Kit, AEM CAI, Bosal Header

Next Mods:
Bored Throttle Body, Ported Intake Manifold

-Nate

___________
-88 Mercury Tracer 1.6 3spd auto
-95 Eclipse GS 5spd
-Mods: Megan Header, Megan Cat-Back, Pacesetter High-Flow Cat, AEM V2, Fluidyne Radiator, Hurst Short Shifter, Prothane Motor Mounts
-All-Motor Buildup on the way
-VIS Invader hood, R34 front, Halo Proejctors, M3 LED Mirrors, Projector Fogs, Blue Heater Hoses

>actually, thats kinda wrong what you said....The reason why
>you cant rev past 7200 RPM's isnt because the bottom end
>isnt strong enough, its because the valves will float off
>the valve springs, and once they do, they will collide with
>the pistons, and well we know what happens from there....As
>far as making your redline higher, the key parts besides the
>computer control limit is getting some high quality
>lightweight valve train components, IE, titanium valve
>retainers, springs etc.


I said top and bottom end, I know about the valves floating
Another thing to consider is without some serious cams and head porting your car is gonna run out of breath (usable power) before 7200rpm anyway.

damn who hits 100 in3rd i want ur tranny man. i can only hit 90 or like 92 i don't know but not 100 unless prob red line. I just want my 5th to be a lil longer you know because like that i can keep up with vette and stuff on the highway intead of top at 140 or so. Well i mean all fo this after i get turbo set up and boosting 20 psi in like 2 years hehehehe..

DsM Power Soon to be turbo yahhhhhh

>damn who hits 100 in3rd i want ur tranny man. i can only hit
>90 or like 92 i don't know but not 100 unless prob red line.
>I just want my 5th to be a lil longer you know because like
>that i can keep up with vette and stuff on the highway
>intead of top at 140 or so. Well i mean all fo this after i
>get turbo set up and boosting 20 psi in like 2 years
>hehehehe..

I know exactly what you mean, we should have 6 speeds.

-Nate



________________
-98 Avenger I4 5spd
-ALL MOTOR build up in process
-Mods: AEM Front Big Brake Kit, AEM CAI, Bosal Header

Next Mods:
Bored Throttle Body, Ported Intake Manifold

-Nate

___________
-88 Mercury Tracer 1.6 3spd auto
-95 Eclipse GS 5spd
-Mods: Megan Header, Megan Cat-Back, Pacesetter High-Flow Cat, AEM V2, Fluidyne Radiator, Hurst Short Shifter, Prothane Motor Mounts
-All-Motor Buildup on the way
-VIS Invader hood, R34 front, Halo Proejctors, M3 LED Mirrors, Projector Fogs, Blue Heater Hoses

we dont have enough usable power for a 6 speed...

2003 Acura RSX Type-S
15.042 @ 93.06
Devon
Creator of one of the longest and most controversial posts in 2gnt history...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=38&topic_id=112462&mesg_id=112462&page=

yea dood, in my stock GS I hit 132, now topping out at 137 with i/e/udp, drag is a biatch

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

>we dont have enough usable power for a 6 speed...

With the right gearing it could be possible because they would be shorter gears.. but it wouldn't be very beneficial if we had about the same top speed.

-Nate



________________
-98 Avenger I4 5spd
-ALL MOTOR build up on the way
-Mods: AEM blue front Big Brake Kit, AEM blue CAI, Bosal Header

Next Mods:
Bored Throttle Body, Ported Intake Manifold, UDP

-Nate

___________
-88 Mercury Tracer 1.6 3spd auto
-95 Eclipse GS 5spd
-Mods: Megan Header, Megan Cat-Back, Pacesetter High-Flow Cat, AEM V2, Fluidyne Radiator, Hurst Short Shifter, Prothane Motor Mounts
-All-Motor Buildup on the way
-VIS Invader hood, R34 front, Halo Proejctors, M3 LED Mirrors, Projector Fogs, Blue Heater Hoses

6-speeds don't generally make a car have the ability to go faster. the main difference is your gears are closer and 1st is much lower then it would be on a 6speed. that and the 6th on most 6speed's isn't generally any higher of a ratio then the 5th on a 5-speed. Probably if it were any higher then your car wouldnt' be able to go as fast like the dude said above. plus.. who the hell needs to go faster then 147mph anyway!?!? hehe.

Well, if we had the money we could get a quaife 6spd tranny for our car. But thats about $15k... They would let you customize the gear ratios. You could also run tires with a higher overall height to kinda cheat to get a higher final drive ratio. But it all comes down to power & rpms. It doesnt matter one bit if you could spin the motor to 15,000 rpm, if it doesn't make enough power for the vehicle to overcome the aero drag at any given velocity.

**************
Fucking Kangaroos.
**************