The title says it all, I don't want to sleeve the cylinder walls and JE only makes a .020 overbore. HELP! Thanks

You can get the JE's in .040 too. Contact Race Engineering in Florida, they can hook you up. Later.

Joe

Yeah I got two tens in the back...two ten pound bottles!!!!

Joe
97 GS w/ HRC stage 2 +

if you want them fast, you can have them 10 day expidited for 25% more I believe. that's what I did.

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

Yes I do need them fast... do you guys have a telephone number and/or web site that I can contact them?

BLKOUT - Thanks for driving the 2 hours to help me out... I really appreciate it. Later...

You can try JE direct http://www.jepistons.com (714) 898-9763.
You could also try http://www.rosspistons.com (800) 392-7677.
Or http://www.wisco.com (800) 321-1364.

You can get the .030" and .040" over but I don't know of any shop that carries them in stock. I'm pretty sure Howell only carries .020" over but can get the other sizes, but I don't know a time frame.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Their phone # is 561-533-5500. No problem on the driving. I hope you get back on the road soon. Later man.

Joe

Yeah I got two tens in the back...two ten pound bottles!!!!

Joe
97 GS w/ HRC stage 2 +

Hey thanks for the info guys... I passed it on to the shop that's doing the work. He can't find anything over .020 and it'll cost about $400 to sleeve the cylinders. I don't know what I'd do without Team 2GNT! Thanks again...