Ok, I just got the rebuild done tonight, fired right up..(smokes a bit?????normal for first time??????) but I have a TON of oil comming out my plug holes...I a pretty sure that grey gasket is ok,,,,should I rtv the crap out of them? (only the 1st and 2nd cyl are doing this, the other two are ok)

Kevin
The old:


The new:

probably just the tube gaskets or whatever they are.....not a big deal... pick them up at chrysler or mitsu dealer

Brandon
'95 GS, Auto.
AEM Cold Air w/ bypass valve
Front Upper Strut Brace
Maxspeed coilovers

Sounds like your O-ring gaskets...cheap and easy fix.

When you replaced the valve cover gaskets, do you do a REAL good job cleaning off the head and spark plugs holes, because if you dont they will leak like a sieve

Yeah, also don't forget to tighten them down in the proper sequence to the proper torque settings. I've heard that not doing that will make em leak.




95 Eclipse RS : 5 speed
Gude cams : test pipe : AFX UDP : ram air : Thrush glasspack : Dual air horns : Kenwood KDC 5000 : AutoCommand remote start
incomming - lower strut bars

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Damn sparkplug gasket are a bitch to put in when you try to put the valve cover back on off the gaskets go, I swear when I replaced mine I feared that the gasket came out when I put the cover on and a geyser of oil would shot up ahaha I'm sooo paranoid O_o

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

I used a little RTV on the spark plug gaskets to hold them into place when placing the valve cover on.

You are not your job.
You're not how much money you have in the bank.
You're not the car you drive.
You're not the contents of your wallet.
You're not your fu**ing post count.

97 Eclipse GS - *SOLD*
01 Audi A6 2.7T
01 YZF-R6