Damnt his car has been giving me a lot of problems and I'm hating all of it. At idle the car sounds fine for like 3-5 seconds, then it just sounds like it's misfiring, or more like a v8. fuel pressure is fine and set at 55psi. I used some fuel injector cleaner early on during the week and I now I'm running rich, but I"m not boosting. Shortly after as I was driving, the car sounded like it was about to shut down, then it was fine again. During the 15 minute drive home, the car stopped acting up. But at the turbo timer was counting down, that same ole V8 sound came back. And my damn ground to the alternator keeps melting off. Got so bad that the black housing that keeps spark from hitting the alternator melted off too. Anyone have solutions for my two problems? I got 480 miles on the new engine.

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph

Running rich? This is maybe of is causings the misdfires. ?

------------------------------

How new are you plug wires? I was having a bad misfire in #1 with my old NGK's and once i switched to the MSD's my misfire problem vanished.

**************
Fucking Kangaroos.
**************

hey joshua i noticed you r runing the platnim plugs do you like them or the ngk better

i just started running the platinum 4's and was wondering if you like them, also. my car's runnin' like crap anyway, so i can't tell if i like the plugs for myself

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

I love them. Have had them in for almost a year now and no problems. Have yet to pull them to check the condition. I want to find a digital camera so i can post pics of the plugs when i do.


***Also they work great in combination with my msd wires***

**************
Fucking Kangaroos.
**************

i just switched it out for the a new set of ngk bkr6 gapped at 35. I noticed car makes that sound when the rpm drops to about 500. Then sometimes it just push itself back up to 800. Maybe the IAC, gotta take all this wire off again and work play with it. I love it when it runs with no problems, but I hate it when it does.

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph

Idle problem, maybe: MAP, IAC, O2 sensor?

Your alternator problems ounds like you have a short in teh woiring, check the run on the wiring and make sure that it's not frayed or anything. It is possibly a problem with the alternator itself...

Una salus victus.
"We are going to have peace even if we have to fight for it." - Dwight D. Eisenhower

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.