how much am i looking at to get his done and how much would a port and polish job be, and one more thing how do i raise my compression a little do i have to get new pistons or do i just have to get head work done all of your help is appriciated

1996 Eagle Talon NA Stock except for ghetto wheels that came on it

Only way to raise compression is new pistons. You can buy a bored out throttle body at www.howellautomotive.com. Or you can send yours to them and have them bore it for you. Now this is what you should get...

I see you have no mods on your car yet. First start out with a Cold Air Intake(AEM,IceMan). And then get an AFX underdrive pulley from the site I mentioned above. Then get an exhaust. And after all those, then get the throttle body.

Dave
05 Ford F150 SuperCrew FX4

i already have a cai but no exhaust i'm thinking of puttin a test pipe in and leaving the stock muffler on and just puttin a tip that way it looks like i'm stock

1996 Eagle Talon NA Stock except for ghetto wheels that came on it

I wouldnt worry about looking stock... you've got rims anyways, so people are gonna know your starting to mod her a little bit. Just dont get a huge ass tip. ARD will bore your stock tb for a real reasonable price, I had more than that done by them, so I dont remember how much just the tb was, maby 80 bucks tops. Might as well ship then the intake manifold too while its apart nad have it ported and polished, and gasket matched.

you CAN get the compression raised another way, by milling the head.. but it's not a good idea at all and can cause lots of problems.. mainly with cam timming cause you are changing the distances with the timming belt cam gears.

The throttle body at Howell (http://howell.mountain.net/Talon/DSMPulleys.html) is 55mm. I heard the stock throttle body is around 46 or 49. Is this significant enough or would a 65 to 70 be that much better or too much. -Steve

03 rally red evo viii - stock
cardomain page
http://www.cardomain.com/id/steve0677

Our stocks TBs are 52mm, i believe, Howell bores them out to 55mm and ARD in houston can do them to 57mm. You can also do the Jeep tb mod which is a 60mm. That is the biggest we can do for right now, unless something new just came up.

Does ARD have a website?
how does their work compare with Howell? they are cheaper but bore it bigger?

i got a TB waiting to be installed. need to know where i can get the best deal.

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar
Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.Radius Rims.Pirelli P7000 Supersports.Eibach Pro kit Springs.KYB GR2.$15 camber mod.TB (waiting to be bored and installed)

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

anyone?

let me ask the question again.. other than Howell.. who else bores throttle bodies for our cars? same quality work?

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar
Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.Radius Rims.Pirelli P7000 Supersports.Eibach Pro kit Springs.KYB GR2.$15 camber mod.TB (waiting to be bored and installed)

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

yeah, how do we contact ARD. Id like to get my TB bored to about 58.

Chris Jones
1997 Dodge Avenger ES 5spd
"Racing Your Honda Is Like Running In The Special Olympics.....Even If You Win You're Still Retarded!!!

Chris Jones
1997 Dodge Avenger ES 5spd
"Racing Your Honda Is Like Running In The Special Olympics.....Even If You Win You're Still Retarded!!!

http://www.advancedracingdynamics.com/main.shtml

96 RST


http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

Alvin

http://www.cardomain.com/id/96rst

thanks.

can anybody tell me the quality of work they do compared to howell?

is there a price difference? is there a shipping cost difference?
( i am in california)

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar
Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.Radius Rims.Pirelli P7000 Supersports.Eibach Pro kit Springs.KYB GR2.$15 camber mod.TB (waiting to be bored and installed)

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.