I can get a complete 95 2.4L minivan engine for a good price. Would this be a good engine to use in this swap? I hear that the 95 blocks have problems. What are these problems?

Also, would the TTI Racing motor mount work in an eclipse?

Does anyone know anyone that has done this swap in an eclipse? Any websites you know about that deal with the swap in a eclipse?

I really think I going to do this if it is feasible.
Thanks in advance

------------------------------

>I can get a complete 95 2.4L minivan engine for a good
>price. Would this be a good engine to use in this swap?
good luck....
I
>hear that the 95 blocks have problems. What are these
>problems?
All then engines are the same from 95-99 the only thing that i notice a difference in is the clutch on the 95 the earlier clutchs have the flywheel and the clutch attached the others dont,

>
>Also, would the TTI Racing motor mount work in an eclipse?
>
idk?

>Does anyone know anyone that has done this swap in an
>eclipse? Any websites you know about that deal with the swap
>in a eclipse?
>
only other eclipsei saw with a different engine is an avenger V6 and that looked pretty damn good

>I really think I going to do this if it is feasible.
>Thanks in advance

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude

ive seen the 2.4 (he likes to call it 2.5 ) and its pretty damn sweet. he then turned on the engine, and i was drooling... we both know now what to do ill let him do the explaining because he knows his shit. where you at bro?

^^what once was^^


^^what is now.. and permanently^^

Is he a member on this board?

------------------------------

one of the avenger guys just swapped a 3.0L 6cyl in with little/no problems. see here http://www.asog.net/bbs2/viewtopic.php?topic=22735&forum=10&44

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

He also swapped from the 2.5L V6, and both are Mitsubishi motors. I have found that it is easiest to swap within the same marque, like a Mitsubishi motor swapping with a Mitsubishi motor, and a Chrysler motor swapping with a Chrysler motor. If you have the 2.0 420a, then I think that the 420a is a good swap, as long as it is a 2.4...
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

cool, thank for the info. The hardest part of this swap, i think, is making all of the brackets fit correctly. What do you guy think about that? Should i just try and modified the eclipse's brackets?

------------------------------

Try it and let us know what happens. If it doesn't work you can always put your motor back in.

Thanks for the info.
I went to see the minivan engine today. It was junk. SO, i didn't buy it. Im going to check a couple more places. Hopefully, I can find a complete engine. But, if I can't, Im going to just buy a block and rebuild it. Oh well.....

------------------------------

...CV came over and we did some talking about. I fired it up for him to hear. It defintely sounds different than your plain vanilla 2L

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

Yeah, I hear the 2.4L has a deep sound.

------------------------------

its not just the deepness... it sounds like a beast... it has a little choppyness to it, like it needs more air.. ive heard the 2.4 on other cars.. but with our engines, it sounds different. and this was just from when skrilla was idle!!

^^what once was^^


^^what is now.. and permanently^^