i have a CEL 43, for igintion something or other from my cams, But whats up with the flashing?

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

It's a MISFIRE code, it's flashing cause it's seeing MISFIRE. Change your plugs and wires.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

could it have anything to do with my cam issues of late? it only came up after i shimmed the cams. could a valve be being kept open or closed a tad to long cause that code? plugs were changed about a month or two ago, and wires are only about a year old.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

I don't see it being the cams, 43 is for spark related problems. When you check the codes does it flash once or twice?







________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

Ya I get that flashing CEL once every few days at idle at a stoplight (when the idle gets real bad). It's always code 43. It only comes up with 43 once though when I check the codes. I just ignore it. I've already tried changing the plugs and the wires to no avail. It's fine most of the time, and also fine if I turn on the A/C at idle to raise the rpm's more so the idle is not as rough.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

I had a flashing 43 when I blew my headgasket. I had very low compression in cylinder #3. But I dont think thats your problem. I thought a flashing CEL means that the problem needs to be addressed imediatlely.

Dave
05 Ford F150 SuperCrew FX4

it only flashes occasionaly when im at a light or idling. when i check codes, it only comes up once. would it help to get the individual P code, (whatever you call it). our CEL list has individual P code numbers for our CEL 43. would that be able to narrow it down a bit?

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

bump

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

If you've done checks on plugs and wires, next check your coil. Then onto fuel.

Marcus, your could possibly be related to your exhaust problem... if there is enough of a restriction in a runner or the system over all I could see the possibility of a misfire. I'm curious now as to how bad the damage is... if you can I'd like to see a pic.

Una salus victus.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Michael, I don't have a picture of the piping, but it was not bent by the dog incident at all. I replied in the other post about the Hotshot header. I had no CEL after the header incident either, so I am pretty sure that my CEL is due to the ported and milled head, which I got about 6 months after the dog incident.

BTW, I heard that the turbo 4g63 guys get that CEL code a lot with cams.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Marcus, how is your timing with the lowered height on the head? Have you tried adjusting your gears to set things back to a true TDC. of course then there is always me thinking they ported too much, but who knows.. it's late

Una salus victus.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I tried a variety of settings and the idle seems to just get worse as I deviate from 0-0. I assume I have to advance the gears a bit to make up for the milled head right? Oh well, I give up. Other people i've talked to with a milled head also said they had a rough idle, and I think having the auto tranny makes it worse.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl