Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine topic #24666
View in linear mode

Subject: "bad effects of "engine breaking" at high rpm?" Previous topic | Next topic
97eclipseRSJun-05-02 04:06 PM
Old School 2GNTer
940 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#24666, "bad effects of "engine breaking" at high rpm?"




          

i was just wondering what exactly can happen from letting off the gas("engine breaking") as i call it, at high rpms. high being around 5-7k. i've heard of people blowing seals and things, but can anyone explain what exactly is happening when that's done. i have an idea of it, but don't really know the details. how hard is it to mess something up by doing this? and what would be the symptoms of whatever it is that would result from high rmp throttle release? i'm just kinda curious, cuz i did this at about 6k in second gear today, and nothing happened that would make me think anything got messed up, but it just didn't feel like it was too good for the engine.

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

BreezioJun-05-02 04:13 PM
Old School 2GNTer
4863 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#24667, "RE: bad effects of "engine breaking" at high rpm?"
In response to Reply # 0


          

i always 'engine brake' and often starting at like 4K-4.5K but nothing higher.. i've never heard of problems from doing this.. UNLESS you accidently over-rev your motor when you do a downshift like that from too high of a speed into too low of a gear.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
97eclipseRSJun-05-02 04:39 PM
Old School 2GNTer
940 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#24668, "RE: bad effects of "engine breaking" at high rpm?"
In response to Reply # 1




          

yeah i always engine break too, but like you said, nothing usually over 4kish. i've just heard that bad things can happen from doing it at very high rpm, and i think i remember reading about someone on here that tried to let off and punch the throttle at high rpm's and blew a seal or gasket or something.

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
BreezioJun-08-02 01:32 AM
Old School 2GNTer
4863 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#24669, "RE: bad effects of "engine breaking" at high rpm?"
In response to Reply # 2


          

yeah, and also your engine looses it's 'breaking' capabilities at high rpms.. so there is no point at all of engine breaking in the high rpms.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
TimACRcoupeJun-08-02 06:18 AM
Member since Apr 23rd 2002
14 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#24670, "RE: bad effects of "engine breaking" at high rpm?"
In response to Reply # 3


          

I do it all the time autocrossing. I don't do it for the breaking effect though. I have to wind second gear up over 5K all the time, keep it at that rev, go higher, hit the brakes, then back on the gas up to whatever again. I don't push the clutch in - no time for that, plus it upsets the balance when you put it back in gear unless you are really quick and accurate with heal-toe shifting.

The motor is not winding down on its own from say 7K to idle. It's usually just for a few thousand RPM. I haven't destroyed anything ... yet :\

9.50 @ 72.4 (1/8 mile) - 2.145 60' (street tires) - Dodges cones good too
Twickenham Auto Club
http://www.teamtac.org/
Tennessee Valley Region of the Sports Car Club of America
http://www.tvrscca.com/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #24666 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.077 seconds, executing 22 queries.