Hey all, I tried using search but couldn't come up with the exact info I need. Do any of you know the exact part number I need for the valve cover gasket kit from NAPA? I found this one (NGAVS50234) and just want to make sure it's correct before I order it. I think I'm leaking quite a bit of oil Thanks a lot!

Ben

I did my valve cover gasket and sparkplug-well gaskets yesterday too....


I don't have the exact number from NAPA, but make sure you get the sparkplug-well gaskets too. And also if you are doing the PCV valve make sure you get the hard hose for it too. Most likely it will break on you, because the heat and the hose is a hard plastic, it tends to crack so be careful. Good luck.

JohannS07

97 GS (daily driver), 90 TSi AWD (toy)

Yeah it looks like the kit from NAPA doesn't include the spark plug well gaskets... Does anyone know where I can get these? Thanks,

Ben

Got all mine from satan, same package... liked 2 say it cost mayB 30-40 (don't remember).

I 2nd the previous comment on the PCV Valve hose, it is NOT a straight hose bent 90', but molded that way. Just about every1 has 2 replace it (cracks EZ).

$%#^@&* cheap parts ,
- J

- J