I was datalogging a run last night and i noticed that my TPS outputs to the pocketlogger 14% when closed and 73% when at WOT, shouldn't this be 0% closed and 100% at WOT? you think my tps is bad? are there any tests to verify if the tps is working correctly? thanks james
#21200, "RE: Throttle position on pocketlogger" In response to Reply # 0
That is exactly what my pocketlogger reads. There is nothing wrong with the TPS, my SAFC shows 0 to 100% throttle.
For some reason, the pocketlogger does not read TPS correctly, and it does this for lots of cars (I tried it in a 2001 V6 accord coupe, it read tps as something other than 0-100%). It might have even said on the website that the TPS % will be off, but I don't remember.
#21201, "RE: Throttle position on pocketlogger" In response to Reply # 1
Well, the logger bases TPS on the factory spec. The sAFC bases it on past experience with the throttle position. If the most that the AFC sees is 50% throttle, it will think that it is 100%, and recalibrate once it sees more. In other words, the highest and lowest vales seen by the AFC become 100% and 0%, respectively. -=B-=
Dude, Boeing called. They want their wing back.
Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate. Me: Can I put that in my sig? Dark0ne95: GO right fucking ahead.