#20170, "ok i installed the motor mounts but!!!!!!!!!!!!!!!!!!!!!!!!!!look plez"
ok i instaled them today and i took about 2 hours front and back but i took of the vertical brace that the front motor mont is on and when i put i back the 2 screws in the back whent on good but the front two only screwed in halp way and when i put a jack under the brace and jack it up their is like a inch gap inbetween the washer and the top of the bolt hereis a pic ok any post will help me alot thank you guys once againc c:\windows\desktop\online services\04122002-173657\hq3.jpg
#20171, "RE: ok i installed the motor mounts but!!!!!!!!!!!!!!!!!!!!!!!!!!look plez" In response to Reply # 0
cant see that pic since it is linked to your hard drive... hit up my site, and check the install page i got... there are pics there to help with the front one...
if all else fails, take it all back off, and put it back on...
and i hope your jackin the car up from the suspension, not the center beam while its Fd up...
good luck
03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003) now: 20g, portfueler, bpu+++ (track/dyno times tbd...) i farted on your wiki
Search
Printer-friendly copy
1 User in Chat
