i already have exhaust and intake i was wonering what should i do next - i heard UDP helps our cars alot - thats what i was thinkink but i wanted to get someone else view on the subject - what about a header - GReddy 4-1??

from my experience, the udp helpd me get up a lil quicker... but after a week, i didnt feel it nemore (had gotten used to it).

now, the 55mm throttle body, i can feel that every time i step on it, whether playin in traffic, from light to light...

hehe, i bet turbo or naws would make u happy

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Most for least money is the $20 motor mounts made by Energy suspension and available from Summit Racing.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

motor mounts - that would help me?? - yea NOS would be nice but not that much money around 200-300 - but i heard a 55mm TB you have to P&P you intake manifold also or get it BORED out to do you any good or can you just straight chnage your TB and do nothing else?

to answer your ? quickly, the motor mounts will decrease wheel hop, and help get the torque to the wheels..
a bored t/b is 55mm, stock is 52mm.. the intake port wher the t/b connects is at 55 or 57mm, so it works well... the t/b combined w/intake is good shit...

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

so you recommend a 55MM TB? - is that hard to change or easy? dont you have to take off intake monifold to get to it?

i dropped a bored TB and CAI on at teh same time on my old 420a SOHC, was a HUGE difference, throttle got a little too touchy for me, but I got used to it. the butterfly could have used a stronger spring also, my leg would get tired from holding my foot off of the gas at highway speeds.. cause if i just rested the my foot on the pedal it'd take off right up to the speed limiter.

best bang for the buck is turbo. it's money but it's gonna be the most power available sooo

http://www.ocaddict.com

thanks beefgg for the sig

nah, you don't have to take off the intake manifold.. To get it off, first you have to take off your intake hose/pipe.. then there are 2 big bolts going horizontal, the wire that is pulled when you step on the gas, and a small hose on the top of the t/b. Once you have those things off, the t/b should fall off.. but now you have to get the 4 star bolts off that hold on the sensors. Mine were a bitch to get off, but some people have had theirs come off easy. Just get a strong T20 bit.. and it should come off. Then put on the new t/b just like you took off the stock one.. and you're done. It've pretty simple. It'll take about 10 minutes from start to finish, as long as the star bolts don't give you too much trouble.


> so you recommend a 55MM TB? - is that hard to change or easy? dont > you have to take off intake monifold to get to it?


Thanks, Richard (97 ESi)
http://www.ourformerselves.com/richard/main.htm

BEST TRACK TIME -- 16.46 @ 86.03mph
----------------------------------------------------------

CURRENT MODS:
AEM Cold Air Intake || Magnacor 8.5 Ignition Wires || NKG BKR6EVX-11 Spark Plugs || Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body

Thanks, Richard -- 97 ESi
16.46 @ 86.03mph

http://www.ourformerselves.com/
http://www.cardomain.com/id/talonipse/

AEM COLD AIR INTAKE | PACESETTER 2.5" MONZA CAT-BACK EXHAUST SYSTEM | OBX B5 MUFFLER | ENERGY SUSPENSION FRONT & REAR MOTOR MOUNTS | 18X7" ENKEI RSF2 WHEELS W/ NITTO NT 450 215/40Z TIRES | GOLDLINE LOWERING SPRINGS | KYB AGX STRUTS | INGALLS FRONT & REAR CAMBER ADJUSTERS | ALPINE CDA-9807 RECIEVER | ALPINE MRD-M300 AMP | ALPINE SWR-1041D 10" TYPE R SUB | Q-LOGIC QLH-.6510SX ENCLOSURE | STINGER HPM 8GA AMP KIT | DAYTONA BLUE PAINT JOB | IMPULL R34 FRONT BUMPER | BLITZ REAR BUMPER | BLITZ SIDE SKIRTS | ECLIPSE TURBO WING | PROJECTOR HEADLIGHTS (BLACK/BLUE) | EURO ALTEZZA TAILLIGHTS | STREET GLOW SG-201 NEO-BLUE NEON UNDER CAR KIT | SPAL AMENITY SHAVED DOOR KIT | REVERSE NITE GLOW GUAGES | OBX SHORT THROW SHIFTER | SYMBORSKIT SHIFTER KIT | AFTERMARKET BLUE SHIFTER | NOKYA FOOT PEDALS

SWEET, thanks for the walk through - that will help me out ALOT - but now another ? - where is the best place to get a 55MM TB at??i tried www.howellautomotive.com and it is 155 i tihnk but it says talon - will that work on ours? - can i find it cheaper?

Howell is $100 for them to bore out yours. Its about a 2 week turn around. I plan on getting mine done as soon as I get the extra TB in the mail. ADR bores our TBs now to 57mm but no one has posted results from that yet who has em so I might get that done if they work out alright oh yeah and ARD will do it for $150 for the TB and intake mani and gasket match em so that is also a +.