I recieved a call from a local shop tonight, who was rebuilding the engine in a 1997 Talon. They knew my father built engines, and had did mine for me. anyways, their question was pertaining to what they called "crank end run". from what they explained to me, once they started putting the block back together, and put on the oil pump, the crank would "snag"..or so they put it. now, i know crank "play" would be like the crank moving back and forth(out of spec) but they said it was out of spec LENGTH wise, like it was sticking out too far. my guess was the crank might be slightly bent. they took the pump back off, and reassembled it, with no problems this time but they are worried about it still. has anyone had an experience even REMOTELY like this while building a 420A back together? my dad is outta town and im baffled.

1997 Silver RS
Built
T3/T4 BB Turbo
20psi
Most current 1/8th mile time: 8.1@93mph 2.015 60'
1996 Black Supra TT
2004 Silver Snake

>question was pertaining to what they called "crank end run".

See how much faster the 420a is?!

We don't get crankWALK- we get crankRUN!

Take that 4g63! lol

want to run?

Buying a honda is wrong, trying to mod it is a sin, saying it's fast is a crime.


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

Look it up at http://2gnt.technologic.org


If not that .. try ther 420A rebuild manual on http://www.heavenz-not-0verflowing.com/files/ .. I know the oil pump blades are turned by offset notches in the crankshaft end. The only thing i can thing of that could cause excessive end-to-end movement of the crank is a bad oil pump, a bad rear main, or a bad crank. All the specs are in the 420A rebuild manual, so check there first.

Good luck, and let us know what you find!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/