#1866, "Specs for Total Seal rings on stock 420a pistons?"
A friend of mine needs to order total seal piston rings but apparently they dont have an OEM spec in their records. Does anyone know the info below required for a custom order? I need:
-Cylinder bore size -Ring width/depth
Someone must have ordered total seal rings for their OEM I4 420a pistons...anyone know where to order these? or did you also have to do a custom order?
Thanks, Vinnie
_________________ Vinnie Lima vlima@csc.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
#1867, "RE: Specs for Total Seal rings on stock 420a pistons?" In response to Reply # 0
hey i have a set of total seal rings they make them for our 420a engine i will get the part number and let you know, they are the extreme series rings, one standard ring, one gapless and one 3 piece oil ring. i found the part number on their website. i think it is www.totalseal.com okay lates
#1868, "RE: Specs for Total Seal rings on stock 420a pistons?" In response to Reply # 0
the part number is 9574. There are some options that you can get like standard bore or specific overbore sizes. I got standard bore to replace my current rings. These rings are the xtreem line they are made fro nitrous, turbo, supercharger, and other extreme applications, so i thought they were a good choice because i am going turbo soon. They are currently in my 420A which is still N/A and they are working fine, just be carefull putting them in! see ya
#1869, "RE: Specs for Total Seal rings on stock 420a pistons?" In response to Reply # 2
LAST EDITED ON 14-May-01 AT 04:13 PM (PST)
Dont have it in there records? Then why did I get the parts number off their website a couple yrs ago. Yeah they've had a parts # for yrs. I got mine from howell automotive but Summit also sells them. Basic specs are on Total Seals website where you look up part #s but if you email them they respond very quickly. BTW the parts number I have is the same as mentioned. Maybe you should have just said DOHC Neon engine. My pistons ring lands were made based on total seal specs.
Stan2gnt Stan2va@aol.com 95 Talon 420A-Turbo Former and future nitrous user
:farfrommugen: Yes I still own a 2gnt. Damn right I've been here longer than U klassic_liven@yahoo.com
#1870, "RE: Specs for Total Seal rings on stock 420a pistons?" In response to Reply # 3
Thanks guys...that part number is the right one..but they have it listed for just "eclipse". I have corrected them and asked them to add the "420a standard bore" info.
_________________ Vinnie Lima vlima@csc.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
Search
Printer-friendly copy
3 Users in Chat
