i can get the bolt of that gose through the motor mount in the front do i have to jack up the engin its on so tight help ma

You have to use two wrenchs. One to hold it, one to turn it - it's free spinning.

Just wrench on it.. hard. it'll come off.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

no it whont budge its so hard

i put a socket wrench on the right side and hung the handle below the car, laid on the groung in front of the car stuck my leg under, reared back and kicked it. that did it for me. after i got that first loosening i used two wrenches one on each side to get it the rest of the way. also look at the write up in the things we've seen before section.
-Josh



weapon-r intake
greddy headers
apex-i n1 catback
afx udp
energy suspension
motor mounts
cf altezza tail lights
bored t/b
magnecore wires
hotter plugs

15.882@86.27

it did not strip the bolt