#14053, "power steering belt squeling and being weird..."
Hello,
Well, let me start with what happened before this. I was at the street races and decided to race an accourd. Anyways, after smoking him I was turning around when I noticed I didn't have power steering. So I took it to a shop and they said the tensioner bearing had locked up and the tensioner had broken. So they replaced all that. Anyways, ever since then when I turn the wheel all the way it starts to squel and when I rev the engine to anywhere above 5000 it squels. Also, when the wheel is turned all the way the belt stops moving for a moment every once and awhile then keeps going, and it squels the entire time. Any fix?
#14054, "RE: power steering belt squeling and being weird..." In response to Reply # 0
I don't know if it's related, but every time i race i loose my PS belt, you should see my belt now, it has literally chunks biten off it. i really hate it.
But my question is, since you replaced the tensioner pulley, have you raced, have you gone to the 7K RPM's range when it used to snap the belt off. i'm trying to know if changing this pulley would eliminate the belt spitted out of it's location.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Drop in K&N Filter and open airbox Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#14057, "RE: power steering belt squeling and being weird..." In response to Reply # 0
you probably just need to add some tension to the belt. try adjusting the tension screw but remember to loosen the nut the holds the pulley to the bracket or you will snap it; i found this out the hard way. you can also get a can of belt dressing from the auto store and spray the belt. that should help to eliminate squeaking.
95 GS -99 front end conversion w/projectors -aem cold air -pacesetter header -apexi dunk cat back -energy susp. bushings and sway bars -kyb gr-2's -weapon cRap coilovers (replacing) -frt/rear strut bars -camber kit -97 gs rims with mich. pilots
jeff_TX
95 GS -99 front end conversion w/projectors -aem cold air -pacesetter header -apexi dunk cat back -energy susp. bushings and sway bars -kyb gr-2's -weapon cRap coilovers (replacing) -frt/rear strut bars -camber kit -97 gs rims with m
#14058, "RE: power steering belt squeling and being weird..." In response to Reply # 4
Oh, the infamous PS/AC belt. Jeff_TX and I and others are in the same position. I had the same exact problem and found out it was the tensioner pulley bolt that was bent then it snapped off.
So ya, sounds like you need to just tighten it up a bit. And remember to what Jeff said about that nut to loosen, very important. So when you took it to the shop to fix it how much did they charge you for the new adjustment assembly?
Search
Printer-friendly copy
1 User in Chat
