I have a few questions that I have been curious for a while. Is it possible to run stage 3 cams on the street?.. Will it die at idle, and I will have to constently rev the engine to keep it alive?.. What are the symptoms of this?.. and if anyone has tried this which cams have you used?
Double check all your coolant and oil lines....., before you take off and see a cloud of smoke behind you!
#136988, "RE: Stage 3 cams on the street?" In response to Reply # 0
They have worked pretty decent for me. Idle is pretty rough but I use the MP manual adjuster so it won't hold an idle until it warms up. Other than that it's fine.
_____________________________________________ 95TalonOwner on DSMTuners.com Wes Tank on WiDSM.org
#136998, "RE: Stage 3 cams on the street?" In response to Reply # 5
Do they feel any more sluggish down low than the 2s? I know everyone was telling me the Crower 2 would kill my low end, but I still drive it around the city, shifting lightly at 2.5k like I did with the stock cams. Might be a little less bottom end there, but hasnt affected my DD ability.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#137004, "RE: Stage 3 cams on the street?" In response to Reply # 6
So, it will pull hard all the way to 7,500, or you can rev to 7,500? The reason I ask is because I used to have a crx with a type r motor, and I miss a good high rpm screamer.
Double check all your coolant and oil lines....., before you take off and see a cloud of smoke behind you!
Search
Printer-friendly copy
2 Users in Chat
