I see this Slave cylinder on ebay. I have been looking around for one for a couple days now. I have been searching and found that people have had problems with recieving the wrong slave. The people on ebay say it fits the GS and RS. I just want to see if you guys will think it will fit. I am not sure if the turbo slave cylinder and the non turbo slave cylinder are the same.
#134690, "RE: Clutch slave cylinder for 420a " In response to Reply # 1 Jul-29-11 10:42 AM by xxsoccerguy55xx
Everyone says not to get it from there. I also have a friend that bought one from both Autozone and Advanced and they did not fit. They are also a little more pricey there. I think i'm going to try that one on ebay, they accept returns. So if it does not fit then I can return it. Do you know if the 4g63 slave and the 420a slave are the same?
#134691, "RE: Clutch slave cylinder for 420a " In response to Reply # 2 Jul-29-11 11:14 AM by xcasbonx
Originally posted by xxsoccerguy55xx Everyone says not to get it from there. I also have a friend that bought one from both Autozone and Advanced and they did not fit. They are also a little more pricey there. I think i'm going to try that one on ebay, they accept returns. So if it does not fit then I can return it. Do you know if the 4g63 slave and the 420a slave are the same?
I bought one from Autozone last year and haven't had an issue with it
Chances are they got one for the turbo model and not the 420a. Go to Advance or Autozone and tell them you need a slave cylinder for a Eclipse RS/GS NON TURBO (specify your year as well since they have to lookup by year too), they should be able to figure it out from there.
#134699, "RE: Clutch slave cylinder for 420a " In response to Reply # 3 Jul-29-11 12:41 PM by bullettdsm
Originally posted by xcasbonx Go to Advance or Autozone and tell them you need a slave cylinder for a Eclipse RS/GS NON TURBO (specify your year as well since they have to lookup by year too), they should be able to figure it out from there.
Bwahahahahahaha....you said a funny
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#134694, "RE: Clutch slave cylinder for 420a " In response to Reply # 9
No. The local store I have had problems with not getting the right part. I am going to try the autozone first. I don't think it will be the right part, but it's worth a try.
#134695, "RE: Clutch slave cylinder for 420a " In response to Reply # 10
Originally posted by xxsoccerguy55xx No. The local store I have had problems with not getting the right part. I am going to try the autozone first. I don't think it will be the right part, but it's worth a try.
Why not do your own research and find the correct part number before trusting the guy behind the counter to give you the right part?
#134697, "RE: Clutch slave cylinder for 420a " In response to Reply # 12 Jul-29-11 12:07 PM by CODE4
Originally posted by xxsoccerguy55xx Well i didn't know thats why I was asking people.
That does not answer my question. Doing your own research means referencing available online catalogs from parts manufacturers and any parts vendors to compare part numbers - not asking a question and expect someone to answer it.
Use common sense and check to see if the part is listed for other Mopar applications. Chances are if the part you are looking at crosses to Mirages, Summits, Colts, or other Mitsu badged motors, it probably will not fit your NV-T350.
#136136, "RE: Clutch slave cylinder for 420a " In response to Reply # 15
Originally posted by JDM MTT I dont know how far you are but if it helps if you get the ebay one for the 420, your crossmember is crushing the release valve :/
This is the exact problem the with autozone slave. Just want everyone to be aware.
#136135, "RE: Clutch slave cylinder for 420a " In response to Reply # 0
Well just to keep you guys updated I bought a slave cylinder from autozone and i specifically said non turbo and he said ok. When i get home and look, the bleeder is on the wrong side and i go to put it on and the bleeder scraps against the crossmember. Also the slave rod is a different size than the stock. So autozones database says that the 4g63 and 420a are the same slave. Also one of the reviews on the slave says that theirs also didnt fit. So when going to autozone be prepared to go with the part number because they WILL give you the wrong one. And I do not think it is just my autozone, I think it is all of them.
Search
Printer-friendly copy
1 User in Chat
