You may laugh, but I think it looks pretty beefy...
Made from Autozones riceroni department. lols.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#134365, "RE: My search for a 3" intake is over!" In response to Reply # 0
I think it looks pretty nice, where did you find it? Also getting rid of a bottleneck >looks so screw it if anyone thinks it looks dumb.
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
#134368, "RE: My search for a 3" intake is over!" In response to Reply # 3
Originally posted by grain why exactly do you need a 3" intake on a n/a engine?
Crower 2 + Race PnP head + a few other high flow mods and ports equals a regular 2.5 inch intake is too small. Im seeing Vacuum while WOT at certain RPM ranges, and you could actually hear the intake choking the engine, a noise which is gone with this intake.
Im about to try an OBX when that gets here too. I need more air...
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#134374, "RE: My search for a 3" intake is over!" In response to Reply # 4 Jun-22-11 03:03 PM by CODE4
Originally posted by 740 turbo brick Im about to try an OBX when that gets here too. I need more air...
That is probably going to hurt you, from poor QC and R&D.
Originally posted by brandonwh64 How much HP does this intake add?
Eleventy-billion. Seriously though, it is an irrelevant question. If anything it is a supporting mod to allow an already-heavy-breather get a bit more.
#134375, "RE: My search for a 3" intake is over!" In response to Reply # 5
Originally posted by CODE4
Originally posted by 740 turbo brick Im about to try an OBX when that gets here too. I need more air...
That is probably going to hurt you, from poor QC and R&D.
Originally posted by brandonwh64 How much HP does this intake add?
Eleventy-billion. Seriously though, it is an irrelevant question. If anything it is a supporting mod to allow an already-heavy-breather get a bit more.
This is the OBX from MB, he gave it a good workover, and ported the TB opening to 60mm.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#134376, "RE: My search for a 3" intake is over!" In response to Reply # 5
Originally posted by CODE4
Originally posted by brandonwh64 How much HP does this intake add?
Eleventy-billion. Seriously though, it is an irrelevant question. If anything it is a supporting mod to allow an already-heavy-breather get a bit more.
Bingo. Can't put a number on the additional horsepower. Dependant on set-up. As well as the additional horsepower may not even be a max difference as much as a power curve difference. Allowing more air to move at the top end, thus extending the curve.
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#134369, "RE: My search for a 3" intake is over!" In response to Reply # 3
Originally posted by grain why exactly do you need a 3" intake on a n/a engine?
If you NA is built enough to make power on a 60mm+ TB, then you shouldn't run any piping smaller than the width of your TB.
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
Search
Printer-friendly copy
0 Users in Chat
97 Talon ESi 14.943@91.35MPH N/A!
