I need some help installing my electronic fuel pressure gauge. Where can I hook up my fuel sending unit? Do I need to buy anything to make it work? I looks like an electronic oil press. gauge sending unit. It has to screw into something. Part numbers would also help.
#13207, "RE: Electronic Fuel pressure gauge??" In response to Reply # 0
I have one.. it's connected to the service fitting on my fuel rail. I just rigged together like 4 differnt fittings to go from 1/8th inch NPT on the sender to whatever size the service fitting is. I don't remember exactly.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13209, "RE: Electronic Fuel pressure gauge??" In response to Reply # 2
the service fitting is on the passeger side.. depending on the year of your car, it may be on the end of the passenger side. it's got a plastic cap covering it.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13211, "RE: Electronic Fuel pressure gauge??" In response to Reply # 4
Take the plastic cap off (it unscrews, it's just like a tire valve, only bigger) and use it to try and fit different fittings.. that's what i did.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13213, "RE: Electronic Fuel pressure gauge??" In response to Reply # 6
On the 95, it's on the fuel rail, passenger side, pointing UP, in the area of the #2 runner of the intake manifold.
it's there, i swear. I have a 95, too.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13215, "RE: Electronic Fuel pressure gauge??" In response to Reply # 8
Yes. Use a standard schrader valve tool, they're like %.50 at any autoparts store.. It threads out.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13216, "RE: Electronic Fuel pressure gauge??" In response to Reply # 9
I tryed to use a 1/4 NPT fitting on it buy it wont go on. It looks like a 1/4" size but the thread looks like more spread apart. not as fine as the sender. I need a fitting to go from 1/4 NPT to whatever is on the fuel rail. Where can I go to test fit? or what sizes do you think I should buy and test?
#13218, "RE: Electronic Fuel pressure gauge??" In response to Reply # 11
It is -4AN. You need to go from -4AN Female to 1/8NPT female. I had to put togther 2 different fittings. If you can find one to do it, that'd be best obviously.
#13221, "RE: Electronic Fuel pressure gauge??" In response to Reply # 14
Ok one last thing. Is the 4 an fitting beveled at 37 deg or 45 deg. I really need to know. I cant tell by looking. and where did you get your fittings?
#13222, "RE: Electronic Fuel pressure gauge??" In response to Reply # 15
I don't know for sure since I didn't have the option...but my guess would be 37. Hopefully someone else will know for sure. I got mine at an industrial hydraulics store. But you can also check: http://www.anplumbing.com http://www.summitracing.com
anplumbing is generally a little cheaper, but I don't know their reputation.
Search
Printer-friendly copy
0 Users in Chat
