I'm going to be doing my vc gasket, oil pan gasket and atx filter change.

I did a search and no iformation about anyone using this. Permatex High Tack sealant.

Has anyone used this for bolts and gaskets like VC gasket, water pump, oil pan, atx pan, threaded fittings, hose connections and oil seals.

On back of bottle is says it won't harden therefore prevents siezing and permits easy disassembly. will not be dissolved by gasoline,kerosene,glycol, transmission fluid, brake fluid,antifreeze soultions,grease,glycerin, lube oils,propane or butane gases. It seals from -65f to +500f (-53 c to +250 c )

In comparison to this,

http://www.autozone.com/autozone/catalog/accessories/accProductDetails.jsp?itemIdentifier=554295_0_0_&displayName=Permatex/3.35+oz.+(95+g.)+tube+Ultra+Black+maximum+oil+resistance+RTV+silicone+gasket+maker&store=772&productId=554295&navValue=16500152&itemId=152-0&parentId=00-10

Which one would have a better cure.

I did pick up the High tack at a good price.

__
1995 gs Saved from the crusher
1998 RS gone to(Dsm Heaven)
1997 gs gone to Dsm heaven

either will work. good stuff.

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

I like the non drying stuff just for holding the VC gaskets in place during installation and giving a little extra sealing power. Use the proper stuff in the corners.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

They both would work, there both a good product

From V's with 8 cylinders to rotarys that spin, as long as its fast everybody wins.