Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine topic #127233
View in linear mode

Subject: "P0125 Closed loop temperature not reached" Previous topic | Next topic
susafussAug-14-09 09:39 PM
Member since Feb 24th 2005
200 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#127233, "P0125 Closed loop temperature not reached"




          

Hi all,3 days ago i started to have a problem were the car did not like to start it was adding to much fuel and was flooding the car. This problem happened once before(but i did not get a cel) and i fixed it by pulling and the changing the plugs, turning down the FP and then cranked the car car with the fuel pump relay disconnected and plugged it back in once it fired, after 20mins of driving problem went away.

This time now i have a cel and it is a P0125 and is the same problem, the car is idling at 1k. Could not find any vac leaks and my map and tps sensor are about 1-4 months old. What does everyone think? The temp guage is about in its average spot so it seems to be at the right temp possibly thermostat stuck open, IAC?

Thanks in advance,
kevin

___________________________________________________________________________
13psi on a built bottom end with a stock now mtx, check mate.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top
Top 2GNT Technical Performance/Engine topic #127233 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.068 seconds, executing 14 queries.