I'm wanting to clean my cai pipe its polished, what do you guys use and methods.

Would brasso work wonders or turn it into crap Cloudy etc..

you can pick up some Stainless Jeweler's Rouge and use that on a powered buffing wheel.

sorry my stick is worn down past the numbers otherwise i would get you some pics and a part number

here try this place out to give you an idea of what you need so then you can get it locally or order it

http://swmetal.com/cart/search?category=Polishing%20Compounds

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

^^ yep thats the method to use. When buying rouge, keep in mind that darker colors are higher cut and the lighter colors are minimal cut/finishing compounds. So if you really want it to shine I would wetsand with some 400 grit then 1000, buff really well with brown/red rouge, then change the pad and use the white rouge to finish it off. Used this method on a fuel rail I did for my VW 1.8T and it looked amazing. Of course I did have to do many different grits since it wasn't polished to begin with.

If it's just dirty and you want to shine it up I've had good luck with bluemagic metal polish. If it's scratched then you need to use something stronger like the other guys are suggesting

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!