#126287, "RE: Would this PT mtx fit in a 1997 2g" In response to Reply # 0
I think the PT turbo actually used a Getrag trans instead of New Venture, so probably not.
Take a close look at the mounts, bolt pattern, axles, and shift levers.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#126321, "RE: Would this PT mtx fit in a 1997 2g" In response to Reply # 4
Originally posted by alain95i4 it will bolt to the engine and the axles will work you would need custom made mounts it could be nice to try to fit one I have a pt turbo atx in my car however it's just a beefier a604 Alain
Thanks man
Question do you have the transgo shift kit for the a604, also. If you do what ar your views about it, good and bad.
I watched an half hour tutitoral install over at transmission exchange. It seems great for the a604, unsure about racing with it though.
#126324, "RE: Would this PT mtx fit in a 1997 2g" In response to Reply # 5
I don't have the shift kit I did a complete regular 420a A604 to PT Turbo A604
I had to swap the flexplate, torque converter, starter because they were all beefier and larger and take from the old one the mounts and the cable linkage
some bolt holes were not as deep on the newer tranny I needed to use a bunch of washers to space the crossmember mount properly or used shorter bolts
as you can see the atx mounts don't look at all like ours
Search
Printer-friendly copy
0 Users in Chat
