Just wondering if having messed up CV axles can hurt performance??? According to my friend, there was a leak in the boots itself and I have a slight elliptical curve in the passenger side axle. Thanks!!!!!

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

I wouldn't worry unless the boot is ripped, the joint is making noise, or you feel vibration. And if you do replace the axle, absolutely avoid the axles that Advance sells. They've given me 3 bad axles in a row. I'm getting a refund and taking my money elsewhere. I am just so sick of changing them out.


Corbin

'95 ESI-T
HRC+FMIC+ETC...

Corbin
'97 GSX dressed like a '95 ESi

Well, I'm getting the bad vibes around 80, but I don't think it has to do with the axles. Ya, the boot does have a tear in it. When I turn the wheel, you can hear it click click. Anyways, thanks for the reply.

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

hey how much are they I am almost sure mine are bad.

Slacker Motorsports
Some stuff......

they generally run between 40-90$ depending if you have abs or no. i think if you do buy the part on your own you should install it. its a very simple procedure. definitely good experiance. get a chiltons tho it'll help. its maybe a 2hour job tops. provided you have all the tools.

Original 15 of 2gnt.com

Speaking of that...here's my Ghetto Axel Swap page:
http://www.houstonhardware.com/~cbehnken/axle.html


Corbin

'95 ESI-T
HRC+FMIC+ETC...

Corbin
'97 GSX dressed like a '95 ESi

And if you are hearing the clicking change it quickly. Who knows how long it will last. Not too hard either, grab a manual and tear into it.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Well, I don't hear the 'clicking' during any type of driving (be it normal or hard). It's only when I'm in a stop, and turn the wheel.

Kris
"Someday............I'll have traction problems!!!!"
Tampa, FL
Pinoy Turbo 2GNT

1999 HRC Turbo RS
Stage 2
Auto with BOOST!!!!!!!!!!!!

If you have a torn boot and grease is getting out, then you will eventually ruin the joint. A tear will tend to spread and eventually all of the grease will fling out. Water and dirt will get in and the joint will fail. It probably won't be a catastophic failure, so you can drive for a while before fixing it. I've had 2 torn boots. Drove about 1000 miles on each before fixing them. You will need to fix it, but you can drive for awhile until its convenient.


Corbin

'95 ESI-T
HRC+FMIC+ETC...

Corbin
'97 GSX dressed like a '95 ESi