#125710, "MP 60mm Throttle Body requires slight manifold machining"
Anyway, my 60mm TB arrived, as well as a 4 piece set of micrometers I found for a good price on Overstock.com.
As you can see on my spare intake mani, it is going to need some machining to fit properly. The corner below the EGR flange creates interference. A little disappointing but nothing huge.
Not sure if it is something with the current run of TB's made or maybe something with my manifold. For those looking to buy one keep this in mind.
#125721, "RE: MP 60mm Throttle Body requires slight manifold machining" In response to Reply # 0
Originally posted by CODE4 As you can see on my spare intake mani, it is going to need some machining to fit properly. The corner below the EGR flange creates interference. A little disappointing but nothing huge. Not sure if it is something with the current run of TB's made or maybe something with my manifold. For those looking to buy one keep this in mind.
i just took an angle grinder to mine to clear away the overcasting, worked fine for me. just made sure not to gouge the actual mating surface and has worked well ever since
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
#125724, "RE: MP 60mm Throttle Body requires slight manifold machining" In response to Reply # 2
Originally posted by teklein Mine did not have that issue, but the IAC cavity was a couple mm's too long. I had to screw the IAC tip out to get it to idle properly.
Good info. I plan on just adjusting the throttle stop however as the IAC will go out the window when the stock ECU is as well.
#125726, "RE: MP 60mm Throttle Body requires slight manifold machining" In response to Reply # 4
since no one else has said it.
HOLY GIANT FUCKING PICS BATMAN!!!!
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
Search
Printer-friendly copy
2 Users in Chat
