just rebuilt my 95 rs 165,185,195,180 psi in cylinders put in new rings and bearing and seal and valve seals and burning oil just finished put it back together for the 2nd time just did the valve seals 2 days ago and still burning alot of oil when i go to drive it and hit the gas it bogs out and slowly speed up runs good and high rpms though... one thing i didnt do was hon the cylinders but i cant aford to pull it all apart again......please help me anything will help
#125488, "RE: burning lots of oil after rebuild" In response to Reply # 0
you redid your motor w/ new rings (i'm guessing), and didn't bother to rehone? If so, your rings will take longer than usual to seat, if they will at all. You'll be burning oil for a while.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#125506, "RE: burning lots of oil after rebuild" In response to Reply # 1
Originally posted by 420agreenvilleSC you redid your motor w/ new rings (i'm guessing), and didn't bother to rehone? If so, your rings will take longer than usual to seat, if they will at all. You'll be burning oil for a while.
+1
good luck with that. rings need the cylinders to be roughed up in order to seat properly. even if you could still see crosshatching on the walls it's not enough.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#125508, "RE: burning lots of oil after rebuild" In response to Reply # 0
Originally posted by bozer94 just rebuilt my 95 rs 165,185,195,180 psi in cylinders put in new rings and bearing and seal and valve seals and burning oil just finished put it back together for the 2nd time just did the valve seals 2 days ago and still burning alot of oil when i go to drive it and hit the gas it bogs out and slowly speed up runs good and high rpms though... one thing i didnt do was hon the cylinders but i cant aford to pull it all apart again......please help me anything will help
Punctuation please? Please indicate you have had some level of formal English education.
Search
Printer-friendly copy
0 Users in Chat
