Alright so i've read over the directions on this site: http://www.vfaq.com/mods/O2bypass.html And i printed them out and took them to Radioshack. The guy read over them and said that the 1/4 watt resister they have but the other 2 dont have to good of a description for him to know witchs ones i need. Can anyone tell me excatly what the other 2 are or atleast the full names of them?
#123604, "RE: O2 Sensor mod help!!" In response to Reply # 0
I'm assuming the 1Mohm is supposed to be the 1/4W? The cap doesn't really matter, just at least 12V. Most will be around 35V anyway. The 12Ohm one, I'd say a 10Ohm, 10W or a be-safe 50Ohm, 10W (PN 271-132 or 271-133) should be fine. Not sure if a code is kicked if the heater element doesn't pass correct voltage or not.
/>
'95 GS w/ t3/t4b FMIC, diy piping & RFL BOV MS2-Extra Fuel&Spark 50 lb/hr Holley injectors w/ 1:1 RRFPR JE 8.8:1 dish w/ Hastings Rings Eagle Rods w/ ARP bolts ARP Head studs Mild port/polish head 3" custom DP/cat section, 3" PIT catback dual MBC - 12 psi / 20psi
Search
Printer-friendly copy
0 Users in Chat
