i just recently rebuilt my motor and when my friend put it in. we double checked all the connections and we tried to start it. it turns but it will not get any spark. we changed the coil pack but i still cant figure out whats wrong.

Double check 3 connectons.

1. See if you switched the connector for the VSS (speedometer sensor) and the coil (same style connector)

2. Check to be sure that the crank sensor is plugged in (down behind the block by, and above, the oil filter. Sometimes missed be cause of location)

3. There is a large connector right under the intake. Because of its location (being hidden in there) it is also sometimes missed.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm