I found a Greddy EVO exhaust it has mandrel bent piping that is also aluminized, whats good/bad bout the aluminized piping? Oh yea and anyone have a Greddy EVO exhaust?

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

I have a 99 Eclipse GS, will that be a good exhaust? The Greddy exhaust has 2.4'' piping is that good? And is the exhaust loud?

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

What about the Greddy SP anyone got that on their DSM and like it? Is 2 inch piping bad for a non-turbo? Would you rather have 2.4 or 2.0 piping?

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

Aluminumized is just mild steel with a thin aluminum coating on the outside. The aluminum prevents the atmosphere from attacking the steel. It'll prevent rust for a good while. After the aluminum disappears, it'll rust like everyday steel. If you are buying an exhaust, get the 2.4". The 2" would end up having an internal diameter less than the stock pipe...that would be a big waste.


Corbin

'95 ESI-T
HRC+FMIC+ETC...

Corbin
'97 GSX dressed like a '95 ESi

How long does the aluminum last? Is it a good investment

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

I have the Greddy SP. I like it but could do without the huge tip. Its been good to me so far. Even though right now the canister is dirty as hell due to the snow and salt, it will shine up like new when I choose to clean it up. I chose the SP cause I think it looks a little more clean than the EVO....I am into the "clean" look as I hope you can tell

_________________
James

Is your exhaust loud Logic 3? Do you have the full cat-back exhaust from greddy?

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

Loud? Hmmm...I wouldn't say LOUD but it has a disinct sound(kind of a growl). I really like how it sounds. At low RMP's its sounds nice and quite but when I fire on it, it turns heads...Which I perfer. I see it as an investment. Its a good size for nitrous or a stage 2 turbo kit.

I have the full cat-back. In my opinion the aluminized piping is a plus. Its nice for me since we do get snow here in KY and the salt I belive would take its toll on standard steel piping.

Is it worth the $500 I spent on it? Maybe not but I wouldn't trade it in for any other exhaust on the market right now. I really like it.

_________________
James

I help out with a formula SAE team. We had the header for our car coated on the inside with ceramic, and onthe outside it was aluminized. The aluminized coating has lasted for a year now with no problems. It hasn't rusted, peeled off, or anything. So it should be good for at least a year, most likely longer

and the aluminized coating looks really good too

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

If I get the greddy EVO full catback will I loose low end power? Ive been hearing that the stock piping is fine, and I should just get a muffler. What size is the stock piping?

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

Stock piping is 2.25" outer diameter, so the inner diameter is smaller than that. But since a gst with 210 hp stock uses the exact same piping (except we have one less resonator), it should be fine unless you do some major mods.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Actually our piping is 2" I measured when I put on the GS-T muffler.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Really? 2" inner or outer diameter? Seems like most people say 2 1/4, and so do the exhaust shops I went to.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

hehe I just painted my 3 inch piping with exhuast paint, it'll never rust now bwahahaha, it's not like people will see the piping anyway. O_o

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Cool, where do you get exhaust paint at, and what kind did you get? How many degrees does it need to withstand?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

You and Micheal are both right. Its about 2.25 OD and 1.875" ID. It is really thick pipe. Regular aftermarket steel pipe has thinner walls, so their 2.25" OD pipe will have a larger ID.


Corbin

'95 ESI-T
HRC+FMIC+ETC...

Corbin
'97 GSX dressed like a '95 ESi