I can't seem to find the name for this thing and I tried to search but its the black squarish reservoir majigger underneath the intake manifold. It has a vaccuum line attached to it that I believe goes up the the mani somewhere. Anyhow, I can't remember how this stupid thing came out when I took it apart, anyone have a pic or some explanation of how to position this thing back on correctly? Thanks in advance!


EDIT: I found the name, the cruise cont. vac reservoir. However, I still can't figure out the correct positioning of this thing on the mani.

///97 Eclipse GS\\\
-Greddy Header-Greddy Evo Catback-AEM Short Ram-3 Angle, P&P (AMM Work)-B&M short Shifter-Symborski Kit-

bump please help guys I'm kinda stuck here

///97 Eclipse GS\\\
-Greddy Header-Greddy Evo Catback-AEM Short Ram-3 Angle, P&P (AMM Work)-B&M short Shifter-Symborski Kit-

its the cruise control vacuum resivor
and the 2 outlets go towards the top of the manifold and point towards the passenger side.
then one line goes to the cruise contol selonoid and the other goes to the 3-prong vacuum feed on the manifold

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

I figured it out, thanks. I found a tiny picture in my chiltons and was atleast able to discern which side went up. 2 holes at the bottom single hole at the top right

///97 Eclipse GS\\\
-Greddy Header-Greddy Evo Catback-AEM Short Ram-3 Angle, P&P (AMM Work)-B&M short Shifter-Symborski Kit-