As some of you know, I just completed a motor swap due to spun rod bearing. After fixing a few small problems, my car is once again up and running. I have a squeal that is making me a little nervous though. It isn't a belt squeal I don't think. It happens at all times unless the clutch pedal is pushed in. I am still running the same clutch from the old motor. Is there something I need to adjust? Will a clutch change fix this? My guess is that it's something to do with the clutch "breaking-in" to the old motor and not sitting right with the new motor. Any ideas?

Thanks for all the help guys! My car would still be sitting in my garage without all the help!

Clint

Does it stop after it warms up? And did it do it before your engine swap when it was cold? I spun my bearings and got them fixed about a month ago and now it is grinding/squeaking/whatever u wanna call it. Sounds like its coming from the tranny. Alot of us seem to have this problem.

Black Sapphire '96 RS w/ Blitz Kit
AEM CAI,AFX UDP,Apexi N1 Exhaust,NGK BKR-5e11 Plugs,Magnecore Wires,Primax 496 17's w/ Falken Azenis Tires,Blue Interior Lights,Greddy Shifter Knob-Boot-Pedals, TYC Black Taillights

Never goes away unless clutch pedal is depressed. It is only loud enough to hear from inside the car if the radio is off. You having the same problem eh? I can live with a small squeal, but it just makes me a little nervous.

Clint

my clutch pedal squeaks when i press it in while the car isn't warmed up.
scares the ___ outta me when i start her in the mornin.

must be a spring or sumthin.

dont know bout yours, but the asog guys mentioned a similar problem, and i know your prob has been brought up before, try a search and u might find it. (im too lazy to look for ya)

tia

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Same thing happens to me but only when cold. Also my RPMS stay at over 1.1K when it squeals. I started noticing this after I had my new clutch installed. What is the explanation for this?

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

hmmm.... mine does the same after i put a new motor in the RS. clutch squeels until warmed up. my uncle's mechanic said the throw out bearing was going bad. *shrugs*