I am not entirely sure if this belongs in the turbo forum or not. In any case, here is the issue...

I turbo charged the 2gnt and after working all the bugs out with that, I noticed that the cruise control has stopped working. I realize that a lot is tampered with during the turboing process, but the cruise control is one thing that I have not messed with.


Just a few things that may be useful for you to help with my diagnosis.

The green cruise control light comes on just fine. The little orange light on the on/off toggle switch lights up. So as far as that goes, they work fine. When I set or try to accelerate using the cruise control it will not maintain speed nor try and accelerate. I thought it may have something to do with being under boost, but I am in vacuum most of the time that I try it. So I ruled that one out.

I have checked all the vacuum lines, which appear to be in good shape. The only other thing I can think is that I may have ruptured the diaphram in the cruise control accelerator linkage thingy.

Let me know what you guys think..

Thanks for the help!

Built block.
Refinished head.
Tuned suspension.
TURBO.

You verified both vacuum lines coming off the vacuum box behind the intake right. One goes to the manifold and the other to the solenoid I believe. Each aren't cracked and are going to the right place correct? Other than that I found this thread with a few other suggestions which might be useful.

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=4&topic_id=28765&mode=full






"And I say, 'Hey, Lama, hey, how about a little something, you know, for the effort, you know.' And he says, 'Oh, uh, there won't be any money, but when you die, on your deathbed, you will receive total consciousness.' So I got that goin' for me, which is nice."

Make sure you check all of your Vacuum lines under the manifold