After driving my buddies talon, I really want cruise on my car. As far as Ive been told, all I need is all the components and they should just plug right in. I checked behind the foglight switch, there is a cruise harness. Is it as simple as plugging stuff in? What about the switch behind the wheel? Thanks for any info.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#114552, "RE: Adding Cruise Control" In response to Reply # 0
Guess there has been threads on this before, but they didnt get any results either...
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#114553, "RE: Adding Cruise Control" In response to Reply # 1 Aug-19-08 08:09 PM by Tuxdreamerx
Sounds like it should all plug in but you would probably need the junction box for all the throttle cables. And the switch behind the steering wheel is a good question. If the wiring is there you could always cut a slot for the switch. If you need the switch I have it.
#114554, "RE: Adding Cruise Control" In response to Reply # 2
Theres actually a little pop out cover where the switch goes. Im pretty sure it was designed from the factory to just be plug and play. I have a harness for power seats under my seat.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#114556, "RE: Adding Cruise Control" In response to Reply # 4
Why did you not want cruise? Depending on what I need Ill let you know.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#114557, "RE: Adding Cruise Control" In response to Reply # 5
Originally posted by 740 turbo brick Why did you not want cruise? Depending on what I need Ill let you know.
got in the way alot of me workin on the car, plus my aeromotive sits good there. We'll see in the future how much of a bad decision i've made, but for now, i'm happy w/ it.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#114559, "RE: Adding Cruise Control" In response to Reply # 7
I want it because Im going to be going to school soon and trying to hold the gas down in the same position for 100 miles a day on the freeway gets old. Plus if I ever sell my car, cruise control is just one more option I can add. As long as there are existing wires, Im gonna try it. Maybe make a write up if I succeed.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#114560, "RE: Adding Cruise Control" In response to Reply # 8
You'll need the junction box and cruise throttle cable and the CC switch, Trade me your non-cruise cable and I'll give you everything I just mentioned. (Minus the switch)
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#114562, "RE: Adding Cruise Control" In response to Reply # 10
I dont know, I might only need a few parts. Im gonna list them, let me know if more are needed.
H=have, N=need
H Cruise on/off switch H Set/acc switch N junction box(and all throttle cables) H Vacuum Servo and throttle cable H Relay that sits on junction box N Vacuum tank(sits under alternator)and vac lines H Connector for Vacuum Servo
I just cut the connectors of the donor car. Will I be able to open the loom for the harness and find these connectors? Or will I have to splice them in somehow? I really want to do this, but Im wondering how im going to get the harness hooked up. Right now the cruise on/off switch works, the yellow light comes on when i push on.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#114563, "RE: Adding Cruise Control" In response to Reply # 11
Well I just found out that you also need the clockspring from the steering of the CC vehicle also. The set/acc switch wires go into that. On my car its just blank with no connectors in it. Guess this isnt going to be as easy as I thought.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#124156, "RE: Adding Cruise Control" In response to Reply # 12
Im bringing this back up, mostly because I havent given up.
The clockspring deal; I actually managed to get it all hooked up, only destroying 1 of my 2 clocksprings. Its pretty much just as I though, all plug and play. The wires are there and just not hooked up to the controls. I managed to aquire a vacuum tank and junction box/throttle cables. As far as I know, I have everything I need to make this work. Do any of you know of there is a seperate computer for the cruise control, or is it all the ECU?
If its just the ECU, Im thinking I can hook all this up, find the pinouts for my car and wire the relay in. Sound plausible?
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
Search
Printer-friendly copy
0 Users in Chat
