#110077, "What is the diameter at the base of our lifters?"
I am a 120 miles away from my car and I am having my dad machine out some lifter shims for me to take up the slack and noise in my valve train. So I was wondering if some one could hook me up with the outside diameter they would need to be machined to, to fit under the lifters in the head. Thanks in advance!
#110078, "RE: What is the diameter at the base of our lifters?" In response to Reply # 0 Sep-20-08 12:53 PM by bullettdsm
I'm thinking its a nominal number so I just went down and measured the OD of a lifter with my cheapo plastic calipers. 16mm OD. That is of the shaft. The actual base has a slight bevel to it.
Just so you get an answer, lol.
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
Search
Printer-friendly copy
2 Users in Chat
