ok I've used search but the answer I wanted wasn't there, my belts are squealing when I turn on the A/C and turn the wheel, I've checked the tension and they're tightened to about a half an inch of movement allowed between the two farthest pulleys, I've checked them for oil or coolant or anything and they're clean, they are pretty new belts (about a month old), the squeal goes away when I rev the engine up to about 4K RPM I really have no idea why they are still squealing even after I tightened them and all that, I normally wouldn't mind it but its downright embarrassing when I'm driving down the street and go around a corner and my car squeals. so please if you have any info on why it might still be doing it let me know.

-Sam (Agas)

1/2 an inch of play? that's too much. tighten it to about 1/4 inch of deflection.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Fixed! thank you! I've always heard half an inch from the locals around here so I thought tightening it more would make it more liable to snap...but thanks! you've saved me from the huge headache I get around every corner!

gatorback poly-cogs u will never have that problem again.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!