#106588, "RE: OBX intake spacer?" In response to Reply # 0 Oct-18-07 04:06 PM by bullettdsm
Having seen and worked with their intake, I would stay far away. But I did find this funny
".....to raise the throttle body one-inch. The additional height combined with the unique OBX spiral flow design creates a vortex airflow that greatly increases power output and fuel mileage."
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#106627, "RE: OBX intake spacer?" In response to Reply # 0
The spacers work wonders on Carborated cars cause it gives the air and gas more time to mix and mix better. This would do nothing on our cars or any Fuel injected cars.I thought about this same product when I started into my car. My Auto Shop insturctors had to teach me.
#106661, "RE: OBX intake spacer?" In response to Reply # 3
Only thing that I know of that is similar is the Phenolic(sp) spacer that VelociaPaula makes, he owns the company that designs and sells them; he is currently in R&D for a new type that will be even more of an improvement.
-Alex
That isn't an oil leak; it's sweat from all of that horsepower.
#106713, "RE: OBX intake spacer?" In response to Reply # 6
I wouldnt give those away, that would have no effect on horsepower whatsoever unless you were running a carburated setup such as a 750 double pumper sitting atop a high rise intake on a big block
Search
Printer-friendly copy
3 Users in Chat
