i need to know the bore size for std, .20, .30, 40. the size in MM. i think .20 is 88mm.
thanks

well stock is 87.5
now i always get this confused: i cant remember if the over bore is added to the Radius, or the Diameter though.

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

Alright, stock bore size is 87.5mm so 20 thousandths over stock is going to be 88.008mm, 30 thousandths over is going to be 88.262mm, and 40 thousandths over is going to be 88.516mm. If I am wrong someone correct me but as far as I know you use the diameter. Hope this helps you out a bit.