There's oil in my spark plug holes, and it's running out causing smoke.....it's only in the passenger side plug and driver side plug....not in the two middle ones...What's the problem?
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
#10561, "RE: oil in spark plug holes..." In response to Reply # 2
My brother just replaced it about a month ago for me....didn't do the spark plug gaskets because no parts stores around here had any idea what they were (including NAPA) or where to order them apparently. Where can I get them at?
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
#10563, "RE: oil in spark plug holes..." In response to Reply # 4
Go to any dodge or mitsu dealership. The spark plug grommets are like $5 a piece. So you are looking at $20 for the set. That's why you are leaking and getting smoke.
----1997 RS---- -less than 2k miles on custom turbo kit- Stock internals@ 5psi | Custom exhaust manifold | 20G turbocharger | Starion FMIC | Intercooler Chrome piping | SPI Boost Gauge | HKS STD BOV | Walboro Inline Fuel Pump | Dual pillar pod | Indiglo
#10564, "RE: oil in spark plug holes..." In response to Reply # 5
ok, do you think since the valve cover gasket was replaced so recently (less than 100 miles easy) that it would be fine to just leave on there without having to get a new one of that too? What's the web address for corbin's walkthrough again? Thanks.
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
#10565, "RE: oil in spark plug holes..." In response to Reply # 6
The valve cover gasket should still be fine. All you need to do is remove plug wires, coil (two 10mm bolts is holding it down i believe) then remove the 8 8mm bolts holding the valve cover and your done.
96 RST: Star Performance stag 05 scion xb: bolt ons 92 nissan 240sx 07 toyota sienna
Search
Printer-friendly copy
0 Users in Chat
