#105491, "Basic question but engine/fuel related."
Ok So I am getting ready to put a new engine in the car but I need new exhaust manifold bolts. I called the dealership and they told me that they don't manufacture them anymore. So I am wondering, does anyone know if Advance or Auto Zone can match up bolts like that? I also apparently lost one of the 12mm eyebolt that connects the hard fuel line from the fuel pump to the FPR. Dealer ship wants like 10.48 plus tax for this thing. Does anyone know if I can get one from either Advance or Autozone? Please let me know, because Im in a time crunch now and it is not good. Thanks
#105494, "RE: Basic question but engine/fuel related." In response to Reply # 2
Advance or Autozone might have one in their "HELP!" section, I know they carry the copper washers for the banjo bolts so just look around, if they don't and the hardware store don't either you could always try the junkyard.
#105507, "RE: Basic question but engine/fuel related." In response to Reply # 4 Aug-07-07 03:20 AM by cs82685
on a side note, you can use 4g63 exhaust manifold studs
Exhaust man. stud to head 8mm MD005317 Exhaust man. nut 8mm MD092806 Exhaust washer 8mm MD041192
If you want these specifically, you can get them from mitsubishiparts.com (cheaper then RRE, about $20 vs $25)
or you could do this...
Originally posted by XtremeRS I just got my studs from Napa today. 9 some dollars for 8 studs and soem nuts. Napa part # x2813-112 They are M8- 1.25 x 40mm size.
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
#105508, "RE: Basic question but engine/fuel related." In response to Reply # 5
Well autozone and advance didn't have either bolts. Bolts that had that would work were not grade 8 and I would trust them, plus the length of the bolts were either too long or too short. The banjo bolt is apparently a 12mm bolt and they only carry 10mm bolt. So I guess this is used for furture reference. I am just going to go to the dealership and have the car sit longer till the bolts come in. Thanks for the help.
Search
Printer-friendly copy
1 User in Chat
